Back to search

South Dakota State University

Characteristics of a New Copolymer For Bulk Heterojunction Solar Cells

Abstract

dc:description.abstract

Organic solar cells have attractive aspects like flexibility, light-weight, environment-friendliness and low-cost due to manufacturing-ease on large area substrates using roll-to-roll processing, solution casting or screen printing. Most high performance organic solar cells utilize tandem structure with wide band gap polymer as a front cell material and low band gap polymer as a rear cell material. Since poly(3-hexylthiophene) (P3HT) has higher band gap ~1.9 eV and absorbs the higher energy photons, it is the most frequently used front cell material for tandem solar cells. However, the HOMO of P3HT is -5.0 eV, generating a Voc around 0.6 V. This limits the device performance of an organic solar cell. In this work, a new wide band gap copolymer poly{2-Octyldodecyloxy -benzo [1,2-b;3,4-b]dithiophene-alt-5,6-bis(dodecyloxy)-4,7-bis(dithiophen-2-yl)-benzo [c][1,2,5]-thiadiazole} (PBDT-ABT-2) synthesized by a post- doctoral student, Dr Qiliang Chen was studied and applied in an organic solar cell with a device structure of glass/ITO/PEDOT:PSS/PBDT-ABT-2:PCBM/Ca/Al. Donor/acceptor ratio, solution concentration and spin-speed for active layer deposition were optimized. PBDT-ABT-2 had lower HOMO energy level, as evidenced from cyclic voltammetry and higher Voc than P3HT, as evidenced from current density vs voltage characterization. The 1:1 donor/acceptor ratio with a solution concentration of polymer (10 mg) + PCBM (10 mg) in 1 mL of DCB had the highest device performance with a power conversion efficiency of 3%, short-circuit current of 7.63 mA/cm2, open-circuit voltage of 0.71 V and a fillfactor of 53.74%. Since PBDT-ABT-2 has higher Voc and wider band gap, it can be used as front cell material in tandem device structures. Future work can include blending of copolymer PBDT-ABT-2 with acceptor materials having higher LUMO energy levels to increase Voc. Optimization of processing conditions using additives, solvent annealing and thermal annealing to improve active layer morphology and current density.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Electrical Engineering and Computer Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Maharjan, Purna P
Contributors dc:contributor
  • Qiquan Qiao
  • David Galipeau

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • Copyright 2013 Purna P. Maharjan
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1575

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Maharjan, Purna P. Characteristics of a New Copolymer For Bulk Heterojunction Solar Cells. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd/1575