Back to search

South Dakota State University

Pitting Corrosion in Copper Premise Plumbing

Abstract

dc:description.abstract

Household systems use copper pipe as the plumbing material due to the excellent characteristics of the pipe such as easy installation and low cost. However, copper pipe is subject to corrosion despite being categorized as corrosion resistant. Pitting corrosion of copper pipe has occurred in several systems across the nation, and a body of research has occurred to identify the causes and remediation of pitting corrosion. This thesis presents the results of investigations into the potential causes and remediation of pitting corrosion that occurred in the premise plumbing of a small proportion of customers in a regional water system. Water quality factors and electrical grounding factors were investigated as potential causes of pitting corrosion. In order to determine causes of corrosion, investigations were conducted at corroded and non-corroded locations (control locations). Water samples were analyzed both on site and in the lab for: pH, alkalinity, sulfate, chlorine residual, and ammonia. Electrical current flow to ground was also measured at all the locations. The water quality results indicated no definite relationship between the plumbing material and a drop in pH. However, a drop in pH was always accompanied by a low disinfectant residual in the first draw sample and significant nitrate and nitrite concentrations as compared to the flowed water samples. Chloride and sulfate concentrations did not differ between the control and corroded locations. However, the high content for both of the compounds in all the water samples could contribute to corrosion, as suggested in the literature. The measured electrical current flow to ground was higher in corroded locations as compared to the control locations, suggesting that grounding of electrical systems to the copper plumbing could be contributing to corrosion. Surface analysis of the pipes and microscopic analysis of the tubercles further revealed sulfur and oxygen to be the main component in the tubercles. A combination of water quality factors and high ground current were observed as potential factors contributing to corrosion.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Thapa, Roshan
Contributors dc:contributor
  • Delvin E. DeBoer
  • Christopher Schmidt

Subjects

dc:subject × 1

Rights

dc:rights
Statement dc:rights
  • <p>In Copyright - Educational Use Permitted<br /><a href="http://rightsstatements.org/vocab/InC-EDU/1.0/">http://rightsstatements.org/vocab/InC-EDU/1.0/</a></p>
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1636

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Thapa, Roshan. Pitting Corrosion in Copper Premise Plumbing. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd/1636