Back to search

South Dakota State University

Interfacial Engineering of Multi-Junction Polymer Solar Cells

Abstract

dc:description.abstract

Organic photovoltaic (OPV) technology has drawn much attention during the past few decades due to its role to role processability, compatibility with flexible substrates and low manufacturing cost. However, one of the major drawbacks of OPV technology is narrow absorption width which limits device performance. To absorb solar energy more efficiently, multi-junction polymer solar cells are used where two or more subcells are stacked together. There are several challenges in developing multi-junction polymer solar cells. These include selection of proper absorber layers and fabrication of robust, transparent, conductive interfacial layer to connect the subcells. The goal of this work was to develop a low temperature processable interconnect layer for solution processed tandem and triple junction polymer solar cells with high efficiency. Different characterization techniques were carried out to find the optimum interfacial conditions to connect the top and bottom cells. The experimental results show that surface morphology of PEDOT:PSS in interconnecting layer (ICL) impacts overall tandem device performance. The annealing temperature for the ICL (PEDOT:PSS/AZO/PEIE) was also investigated. The new ICL was used to successfully connect the top and bottom cells in double junction polymer solar cells without major losses. A triple junction polymer solar cell was also fabricated using the same ICL where identical polymer (P3HT) was used in top, middle and bottom layers. Double junction Voc of 1.05 V and triple junction Voc of 1.4 V indicated that the ICLs worked xiv effectively. However, triple junction solar cells exhibited poor device performance. The Jsc of triple junction polymer solar cells was low due to the use of the same polymer in top, middle and bottom cells. FF and Voc of triple junction polymer solar cells were improved by optimizing the thickness of active layer.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Electrical Engineering and Computer Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mitul, Abu Farzan
Contributors dc:contributor
  • Qiquan Qiao

Subjects

dc:subject × 2

Rights

dc:rights
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1797

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Mitul, Abu Farzan. Interfacial Engineering of Multi-Junction Polymer Solar Cells. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd/1797