Back to search

South Dakota State University

Tolerances for Placement of Tie Bars in Portland Cement Concrete Pavement

Abstract

dc:description.abstract

This research study was conducted to investigate the effects of misaligned tie bars on the tie bar and longitudinal joint performance using experimental testing and analytical modeling. The results of the experimental testing and analytical modeling will be used to establish placement tolerances for tie bars in portland cement concrete (PCC) pavements. The experimental testing was performed during the spring of 2014 in the Jerry Lohr structures laboratory on the SDSU campus in Brookings, SD. Experimental testing was completed on 35 specimens that contained either a single aligned or misaligned tie bar. Four different alignment configurations were tested, vertical translation, vertical skew, longitudinal translation, and horizontal translation. For each alignment configuration, four different misalignment magnitudes were tested to determine how the severity of the misalignment affects the tie bar and joint performance. During testing of the specimens the applied actuator load, tie bar strain, and relative displacement of the slab about the joint in all three dimensions was collected. To validate the experimental results and obtain a better understanding of stress distributions in the concrete and tie bars xxi an analytical model of the specimen was created using the finite element analysis software Abaqus. However, the results indicated that the current tie bar placement tolerances specified by the South Dakota department of transportation (DOT) are adequate. The testing results showed that the vertical translation, vertical skew, and longitudinal translation alignment configurations performed equivalently to an aligned specimen. The results from the horizontal skew alignment configuration, on the other hand, showed significant differences from the aligned specimens. However, the horizontal skew misalignment still performed adequately up to the limit of the current tie bar placement tolerances.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Olson, Walker Lee
Contributors dc:contributor
  • Nadim Wehbe

Subjects

dc:subject × 2

Rights

dc:rights
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/1786

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Olson, Walker Lee. Tolerances for Placement of Tie Bars in Portland Cement Concrete Pavement. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd/1786