Back to search

South Dakota State University

Development of Material for 3D Printed Habitats with Extraplanetary Applications

Abstract

dc:description.abstract

3D printing, also called Additive Manufacturing, has increasingly become a focus for research because of the potential to replace complicated assemblies or complex parts with a single printed item. The space industry is very interesting in studying 3d printing with parts being tested and used on rockets, a 3D printer being installed at the International Space Station and is being developed for use in manned exploration of extraplanetary bodies to build habitats. To encourage teams from around the world to develop technologies and materials for autonomous habitat construction using minimal Earth exports, NASA created the 3D Printed Habitat Challenge. NASA is looking for creative and innovative materials and ideas from around the world to aid in reaching their own mission and research goals. To compete in the 3D Printed Habitat Challenge, a thermoplastic concrete was developed that can be 3D printed and used in the future exploration of the solar system. Using HDPE as a binder, the plastic was combined in various weight ratios with sand aggregates to find flexural and compressive strengths. Samples were created by molding mixtures, and later 3D printing with the optimum mixture. The optimum molded mixture was determined to be a 30%wt. HDPE, 70% wt. fine sand aggregate mix, which yielded a flexural yield stress of 14.03 ± 1.59 MPa, and a compressive yield stress of 15.27 ± 0.86 MPa. This mixture was then printed on the large 3D printer and saw increases in flexural and compressive yield strengths to 16.55 ± 0.32 MPa and 21.61 ± 0.04 MPa, respectively. This increase in strength has largely been attributed to the mixing and heating process that occurs organically via the extrusion process. This implies that mixing and heating in the extruder of a lower plastic content mixture could produce better results, with less plastic material. This is a major benefit when plastics are need for construction and must be exported to other planetary bodies.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wait, Taylor
Contributors dc:contributor
  • Todd Letcher

Subjects

dc:subject × 6

Rights

dc:rights
Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/2675

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Wait, Taylor. Development of Material for 3D Printed Habitats with Extraplanetary Applications. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/2675