Back to search

South Dakota State University

An Electromechanical Automatic Voltage Regulator for a Network Computer

Abstract

dc:description.abstract

This thesis presents a project in the design and study of a voltage regulator for generators on an AC network computer. The entire unit consists of two main parts: the part with sensing and amplifying circuits and the part with power drive devices. In the sensing and amplifying circuits, tubes such as 5651, 12AX7, and 12AU7 are used. The variation of AC voltage of a generator in a network system, as simulated by a variac on the analyzer, is sensed, after being rectified, by a grid of 12Ax7 while the grid voltage on the other half of the tube is maintained constant by tube 5651. The subsequent variation of plate voltages of both halves is then fed, through a voltage amplifier 12Ax7 stage, to a twin triode 12AU7 stage which serves as a current amplifier. The power drive circuit consists of a 27 volt DC shunt motor, two C11B trinistors, or silicon controlled rectifiers as they are commonly called, and their associated gating circuits. The gating of the trinistor is studied and saturable core reactors are used. Plate currents of both halves of 12AU7 flow through DC control windings of the saturable reactors respectively. The DC voltage for the motor is obtained from an AC source through the inverse-parallel connection of trinistors which makes bi-directional rotation of the motor possible. The motor, being coupled through a reducing gear to the variac on the analyzer, will drive the variac in a proper direction so as to maintain a constant voltage output from the variac. The dynamic response of the regulator unit is tested with the aid of an X-Y plotter.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Lee, Charles Chiung-Hsiung

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/2775

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Lee, Charles Chiung-Hsiung. An Electromechanical Automatic Voltage Regulator for a Network Computer. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/2775