South Dakota State University
Design and Testing of Experimental Components Used on Photoelastic Analysis
Abstract
dc:description.abstractExact solutions of the stress distribution in elastic bodies are confined to a selected group of geometric configuration. The nature of irregular-shape problems prohibits a solution by closed formula or even by a general form of solution. All experimental techniques have weaknesses which limit their usage. Strain gauges give a numerical solution but only at a surface. Stress coating are materials which will fail when a prescribed stress value is reached. Such brittle coatings will show the direction, magnitude, and distribution of tensile stresses over an entire surface but they are restricted to some designated level of failure. Two dimensional photo elastic studies require a model of the prototype and a polariscope. Photo elasticity is an experimental technique which will effectively measure the stresses in a cross-sectional areal. Irregularities such as connectors, holes, notches, and other shape complexities cause stress concentrations which are impossible to evaluate. Actual machine parts which have stress-concentrations in three dimensions can be analyzed by three dimensional photo elastic methods. Severe changes in the stress-optic constants and mechanical properties of photoelastic material are observed at the critical temperatures of stress-freezing. This thesis will be concerned with the establishment of a fundamental laboratory procedure and the calibration of the equipment for a complete photoelastic analysis.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - Open Access
- Discipline thesis:degree_discipline
- Mechanical Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Peterson, Alan Rae
Rights
- Language dc:language
- en
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd/3069