Back to search

South Dakota State University

Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate

Abstract

dc:description.abstract

Several studies have been conducted on FDM 3d printed materials such as PLA (Polylactic Acid) and ABS (Acrylonitrile Butadiene Styrene), however, not for ASA (Acrylonitrile Styrene Acrylate). The use of ASA has been increasing due to its resistance to UV, heat, and some chemicals. The resistance to UV prevents the material from degrading its material properties in common outdoor conditions, whereas resistance to heat and oil prevents the material from discoloration. This combination of effects allows designers to use ASA in outdoor applications, however, material properties for ASA in the FDM 3d printing manufacturing process are not well defined. It has been shown for many other FDM 3d printed materials that raster orientation used for manufacturing parts can play an important role in predicting part strength. In this study, raster orientations used were 0⁰, +/-45⁰, and 90⁰. To perform the tests, MTS Universal Testing Machines were used along with Digital Image Correlation (DIC) to measure strain. DIC was incorporated to replace the use of strain gauge in the sample to find poisons ratio of the material. The results showed that raster orientation affects some material properties significantly, such as tensile, impact and flexural test. In these cases, 0⁰ raster orientation produced the highest result whereas +/-45⁰ and 90⁰ produced a similar lower strength. For other tests, such as compression, fatigue, and shear, raster orientation had a much weaker effect on part strengths.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cahyadi, William
Contributors dc:contributor
  • Todd Letcher

Subjects

dc:subject × 2

Rights

dc:rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/3187

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cahyadi, William. Mechanical Properties of 3D Printed Acrylonitrile Styrene Acrylate. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/3187