Back to search

South Dakota State University

Stress Distribution in and Deflection Properties of Tri-plate Beams in the Plastic Range

Abstract

dc:description.abstract

Tri-plate beams combine versatility, economy, and strength in steel design. These beams have many applications which indicate increased efficiency and economy in long-span plate girder construction. Their structural advantages are almost unlimited. Tri-plate beams are fabricated by welding three different types of steel to form an I-section. Each flange and the web of the section is fabricated out a different yield strength steel. Because the flanges of a beam contribute most of its movement resistance, the use of high strength steel of in the flanges is desirable. However, in tri-plate beams, the tension flange consists of a higher strength steel than does the compression flange because of the buckling liability of the compression flange. The utilization of a higher strength steel in the tension flange also makes possible a reduction in the tension flange cross sectional area. Because of its low moment carrying capacity, the web is fabricated out of a lower strength steel. The idea of tri-plate beams is not totally new, having previously been used to a very limited extent in plate girder construction is analogous to composite design, where the reinforced concrete slab is used as a large compression flange, the web is of a low strength steel, and the tension flange is composed of a high-strength steel. High strength steel beams have indicated increased economy in steel design. Tri-plate beams will offer still more economy while, at the same time, provide new possibilities in construction with structural steel. Furthermore, these beams represent savings in material and the availability of lighter sections that can meet the competition presented by prestressed concrete.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Agricultural Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Cline, Richard Clarkson

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/3286

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Cline, Richard Clarkson. Stress Distribution in and Deflection Properties of Tri-plate Beams in the Plastic Range. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/3286