Back to search
South Dakota State University
Structural Behavior of High-strength Bolted Connections with Varied Hole Diameters
Abstract
dc:description.abstractThe main objective of this study was to determine the effect of an increased hole diameter on the structural behavior of high strength bolted connections. This study was limited to 3/4 inch diameter and 7/8 inch diameter bolts. Both butt and lap joints were considered in this investigation. Joints were made with a hole diameter 1/16 inch, 1/8 inch, 3/16 inch and l/4·inch greater than the nominal bolt diameter. Two bolt sizes were used along with varying plate thicknesses. To insure accurate results, each test was repeated three times.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - Open Access
- Discipline thesis:degree_discipline
- Civil Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Haisch, William Thomas
Rights
- Language dc:language
- en
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd/3541