Back to search

South Dakota State University

Bridge Girder Webs Subjected to Horizontal Loads

Abstract

dc:description.abstract

Common bridge construction practice in South Dakota involves suspending the deck finishing machine and the freshly poured deck overhang from temporary metal brackets. These brackets are attached to the webs of the exterior plate girders. When loaded during construction, the brackets transmit to the web a vertical shearing force plus a couple. Since the webs are not designed for carrying horizontal loads, this type of loading could overstress the webs and appreciably lower their ultimate resistance to buckling. With specifications now permitting large depth to thickness ratios, deflections as well as stresses may be excessive. Rotation of the brackets, caused by deflection of the webs, lowers the paving machine and could result in undesirable thinning of the slab. To reduce stresses and deflections, contractors are now required to place the brackets within six inches of a lateral stiffener. However, because stiffener spacing varies from bridge to bridge, standardization of formwork becomes impossible and the resulting bracket spacing may not always be the most economical. By developing a bracket which could be used without regard to stiffener spacing, construction time and cost could be reduced.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Civil Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Preheim, Randall Felix

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/3825

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Preheim, Randall Felix. Bridge Girder Webs Subjected to Horizontal Loads. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/3825