Back to search

South Dakota State University

Effect of Transistor Selection on Feedback VCO Performance : ʻAnalytical - Numerical Studyʾ

Abstract

dc:description.abstract

The primary objective of this research was to find the effect of two important parameters, fT and Cc, of the transistor on the feedback line length, stub line length, tuning capacitor and external Q of the circuit, in designing a VCO. VCOs in this frequency range are normally designed using either an FET or a BJT, as an active device. In the following chapters, the model based preliminary designing process of a VCO is explained in detail, using a BJT. The first step in the process was to develop a better high frequency model of a BJT, since the existing models were inadequate in explaining the high frequency behavior of the BJT, especially the transit time and the nature of RC distribution, which cause a delay from emitter to collector. An extensive literature search resulted in a model which accounts for the nature of the RC distribution. The second step was to verify the validity of the model. One way of verifying was to calculate scattering or admittance parameters of the transistor numerically from the model and compare them with the measured scattering or admittance parameters of the transistor, which are normally listed in the manufacturers data sheets. The third step was to find the parameters of the basic oscillator circuit. The basic oscillator circuit has a BJT, a feedback transmission line to give a and a stub line to give zero output susceptance. Both lines are microstrip elements. The free-space equivalent lengths of the lines are found and used. The fourth step was to incorporate a varactor for the tuning of the oscillator circuit. The varactor was tried at both input and output of the circuit and placed for the best tuning range. The fifth step was to calculate the tuning range and external Q of the circuit. To fulfill the primary objective, all the above steps were repeated for several transistors different fT and CC values.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Electrical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Kumar, Ravinder

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/4453

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Kumar, Ravinder. Effect of Transistor Selection on Feedback VCO Performance : ʻAnalytical - Numerical Studyʾ. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/4453