Back to search

South Dakota State University

The Effect of Steel Fibers and Compressive Reinforcement on the Plastic Rotation Capacity and Properties of Reinforced Concrete Continuous Beams

Abstract

dc:description.abstract

A reinforced concrete structure must satisfy adequate strength at ultimate load stage and serviceability at service load, and it must meet the ductility requirements. Unfortunately reinforced concrete, unlike steel, tends to fail in a relatively brittle manner due to its limited ductility, which has led to a limitation in steel quantities to be used by the ACI Code. An over-reinforced concrete section will fail by crushing of concrete before the yielding of steel, whereas in under-reinforced section the steel will yield before the crushing of concrete. Ductility plays a significant role in structures, especially those built in seismic zones or those subjected to blast or suddenly applied loads. Numerous investigations have dealt with. ductility in reinforced concrete structures, thus leading to improved economy, and sometimes to simplified design procedures. New design concepts have been developed, especially the use of the limit state design concept, which relies heavily on the inelastic behavior of reinforced concrete. For the limit state design concept to be valid, a concrete structure must have adequate rotation capacity that exceeds what is required by the plastic hinges. Plastic hinge rotation depends primarily on concrete compression failure. A low compressive strain in concrete will reduce the degree of moment redistribution; therefore, a collapse mechanism will develop without reaching the ultimate load capacity, unless the ultimate strain can be increased in some way, as adding fibers to the concrete mix.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Civil Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Qassem, Nizam A.
Contributors dc:contributor
  • M. Nadim Hassoun

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/4475

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Qassem, Nizam A.. The Effect of Steel Fibers and Compressive Reinforcement on the Plastic Rotation Capacity and Properties of Reinforced Concrete Continuous Beams. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/4475