South Dakota State University
Field Evaluation of a Catenary Trail Tube Irrigation System
Abstract
dc:description.abstractA new concept in irrigation system design, catenary trail tube (CTT), uses perforated polyethylene plastic tubes to replace the sprinklers on a center pivot irrigation system. Most of the water can be applied with low energy (41 kPa, 6 psi) in the vicinity of the plant base, away from direct influence of sun and wind at a rate which matches the infiltration rate of the soil. Therefore, the losses due to evaporation, wind drift, and surface runoff can be significantly reduced. A CTT irrigation system with three different tube spacings of 1.5-m, 3.0-m, and 4.5-m was tested and compared with a low energy (41 kPa 6 psi) sprinkler (LES) irrigation system. Corn and soybeans were used as test crops to evaluate water use efficiency, uniformity of water distribution, and water loss due to surface runoff. A comparison of CTT and LES irrigation systems indicated that water use efficiency of 1.5-m tube spacing of CTT irrigation system was greater than other tube spacings and LES. Water application distribution of LES was more uniform than CTT. The water loss due to surface runoff from sprinklers was higher than from trail tubes, especially from wheel-track rows in both corn and soybeans. The overall results indicated that 1.5-m and 3.0-m tube spacings of CTT irrigation system can be considered as the optimum tube spacings. Choosing 3.0-m tube spacing as an optimum spacing. means fewer number of tubes to cover the same irrigated area, which is desirable from the viewpoint of system operation.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - University Access Only
- Discipline thesis:degree_discipline
- Agricultural Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Bagherzadeh, Mohammad Hossein
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd/4561