Back to search

South Dakota State University

Temperature Effects on Integral Abutment Bridges During Final Construction Stages

Abstract

dc:description.abstract

This study of the integral abutment type bridge was based exclusively on the design used by the South Dakota Department of Highways. The design utilizes an HP10 x 42 steel bearing pile field welded to each bridge girder. To secure proper interaction between the concrete abutment and the steel girder, shear studs or a small stiffener are shop-welded to the girder web on a line coinciding with the eventual center line of the integral abutment which is two feet wide. Reinforced holes are also located in the girder web near the interior face of the integral abutment to accommodate shear bars orientated at 45 degrees with the plane of the web. Their function is similar to that of the previously mentioned shear studs or small stiffener. The main objective of this experimental project was to investigate and evaluate the effects of thermal movements on an integral abutment type bridge during the final stages of construction. This study is a continuation of the research carried out by Mumtaz B. Sarsam. Particular attention was given to the evaluation of the resultant state of stress in the end portion of the girder near and contained within the integral abutment, the upper portion of the steel bearing piles, and in selected locations on the concrete abutment. The vertical forces created within the span because of the rotation of the integral abutment were noted. Emphasis was also placed upon the action of the backfill and the resistance that it offered to the simulated thermal movements of the integral abutment type bridge.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - Open Access
Discipline thesis:degree_discipline
Civil Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Holman, David Earl

Rights

Language dc:language
en

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd/4709

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Holman, David Earl. Temperature Effects on Integral Abutment Bridges During Final Construction Stages. Thesis - Open Access thesis, https://openprairie.sdstate.edu/etd/4709