South Dakota State University
An Electrically Operated Remote Control for Hydraulic Valve Spools
Abstract
dc:description.abstractThe objective of this study was to develop a remote control device for actuation of a hydraulic control valve. This work was funded in part by a grant from Du-Al Manufacturing Company of Sioux Falls, South Dakota. The following design criteria were established by Du-Al and University personnel: 1. Low cost—the manufacturer’s cost should be under $50 per spool. 2 Operation of the loader should be similar to the original system. 3. The controller should be adaptable to existing loaders. 4. The controller should fit any combination of tractor-cab-loader. 5 A higher order of reliability under the severe operating conditions of farm use must be maintained. 6. It should be possible to disconnect the loader-controller combination easily. 7. The control system must be fail-safe. 8. Operator retaining should not be necessary.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - Open Access
- Discipline thesis:degree_discipline
- Agricultural Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Torkelson, Orrin James
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd/4973