South Dakota State University
Printed Circuit Board Process Wastewater Characterization and Treatment
Abstract
dc:description.abstractThis study is part of a larger study performed to help a printed circuit board facility resolve wastewater treatment problems. The existing chemical precipitation treatment system was operating at full capacity and generating a large amount of hazardous sludge. One of the major concerns of the manufacturer was the high cost of disposing the hazardous sludge. Before any treatment alternatives could be evaluated, an understanding of the wastewater characteristics was required. This was achieved by sampling various sources of wastewater and determining their flow contributions to the composite wastewater. Copper was the major metal of concern in the waste streams and was strictly regulated by local authorities. Major sources of copper were from the spray rinses following the electroless and acid copper plating processes. These low-volume spray rinses contained high copper concentrations. Therefore, segregating the spray rinses from the other waste streams and treating the low volume spray rinses separately were suggested. Following a survey of treatment techniques, ion exchange and electrolytic recovery were selected and evaluated for treating the spray rinses. Bench scale units of these processes were constructed and used to treat the spray rinses. The results indicate that these processes are capable of treating the spray rinses.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - University Access Only
- Discipline thesis:degree_discipline
- Civil Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Chew, Chin Fei
- Contributors dc:contributor
-
- Delvin E. DeBoer
Subjects
dc:subject × 3Rights
dc:rights- Language dc:language
- English
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd2/89