Back to search

South Dakota State University

Processing and Testing of Corn Based Foamed Plastics

Abstract

dc:description.abstract

High temperature short time extrusion processing was used to produce a corn flour polystyrene foamed plastic. The resiliency, bulk density and thermal conductivity was measured of the extrudates. The minimum bulk density and thermal conductivity measured was 0.069 g/cm 3 and 0.044 W/m C. The maximum resiliency measured was 89.1%. Three separate multiple regression models were developed to predict resiliency, bulk density and thermal conductivity as a function of extrudate formulation ingredients. The models were used to prepare optimal formulations for extrusion. The resulting extrudates' resiliency, bulk density and thermal conductivity were within the range of commercially available foamed plastics. Viscosity measurements were performed on the formulation producing the lowest bulk density. Rheological flow curve for this formulation depicted pseudoplastic type behavior indicating it has flow properties similar to both starch and plastic polymer.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Agricultural Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Raghavachari, Sampath
Contributors dc:contributor
  • Jim Julson

Subjects

dc:subject × 2

Rights

dc:rights
Language dc:language
English

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd2/49

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Raghavachari, Sampath. Processing and Testing of Corn Based Foamed Plastics. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd2/49