Back to search

South Dakota State University

Design, Testing and Evaluation of an Air Injection Grouting System for Geothermal Bores

Abstract

dc:description.abstract

The objective of this research was to examine the feasibility of an air injection grouting system for geothermal bores. The system that was researched used a pressurized blow tank to pneumatically transport dry bentonite granules through a three quarter inch hose into a wet bore. Upon contact with the annular fluid in the bore, water or drilling mud, the particles hydrated and formed a grout. A ball valve on the bottom of the tank allowed the feed rate of particles into the hose to be adjusted. Granular bentonites that were tested ranged in particle size from four to fifty mesh. The pneumatic conveying properties of granular bentonites were studied in dry injection tests. Mass flow rates up to 50 lb/min were found at a tank pressure of 25 psi through a fifty foot length of hose. Air flow rates ranged from 8 to 17 scfm for pressures of 15 to 25 psi. Tests simulating wet bore conditions were also performed. A method of removing the injection hose at a constant rate was found to produce a uniform, high solids content grout. A relationship between mass flow rate and the percent solids of the resulting grout was discovered in tests with drilling mud as an annular fluid. The mass flow rate and percent solids relationship for tests in water was influenced by the type of granular bentonite.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Mechanical Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Streich, Galen A.
Contributors dc:contributor
  • Charles Remund

Subjects

dc:subject × 2

Rights

dc:rights
Language dc:language
English

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd2/249

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Streich, Galen A.. Design, Testing and Evaluation of an Air Injection Grouting System for Geothermal Bores. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd2/249