Back to search

South Dakota State University

An Analysis of the Modulus of Elasticity for the High Strength Concrete Mix Used for South Dakota Department of Transportation Project SD98-06

Abstract

dc:description.abstract

The American Concrete Institute (ACI) defines high strength concrete (HSC) as concrete that has a compressive strength in excess of 6,000 psi. HSC has been developed over the past 40 years and is used mainly in the high-rise building industry. The use of HSC is slowly being applied to highway structures. On account of this new application, the material properties of the concrete must be accurately determined to ensure the safety and serviceability of the resulting structure. South Dakota Department of Transportation project SD98-06 used the first commercially produced concrete with compressive strengths in excess of 10,000 psi in the State of South Dakota. The goal of the research that has accompanied this project is to measure and describe the physical properties of this new concrete mix. This thesis is an analysis of the testing related to determining the modulus of elasticity of the concrete. Through the applied testing and analysis it is evident that the modulus of elasticity for this mix is substantially larger than the modulus for normal strength concrete. Using linear regression techniques, the following equation to estimate the modulus of elasticity by relating the compressive strength and the unit weight was developed. E = ( 39,000fj; + 2,000,000) (~)1.5 145 E = Static modulus of elasticity, psi J; = Compressive strength of concrete at time of test, psi w e = Concrete unit weight, lbs/ft3 This equation was then compared to the accepted ACI equations for estimating the modulus of elasticity for normal and high strength concrete. The resulting empirical equation produces estimates that are greater than the estimates given by the accepted equations. Though not statistically similar, the equation is within ± 20% of the other investigated equations. The increased modulus values are attributed to use of quartzite as the coarse aggregate.

Degree

thesis:*
Name thesis:degree_name
Master of Science (MS)
Level thesis:degree_level
Thesis - University Access Only
Discipline thesis:degree_discipline
Civil and Environmental Engineering

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Konda, Travis Frank

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd2/809

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Konda, Travis Frank. An Analysis of the Modulus of Elasticity for the High Strength Concrete Mix Used for South Dakota Department of Transportation Project SD98-06. Thesis - University Access Only thesis, https://openprairie.sdstate.edu/etd2/809