South Dakota State University
Strength and Stiffness of Energy Panel Structures Wood-framed Metal-clad Diaphragms
Abstract
dc:description.abstractResearch was conducted to determine the strength and stiffness of wood-framed metal-clad diaphragms for Energy Panel Structures. These tests were conducted on diaphragm sections constructed to simulate roof sections. The roof sections were constructed in two different arrangements, cantilever and simple beam. In all, there were 29 diaphragms tested, 15 cantilever and 14 simple beam. For each series, a different fastener pattern was used along with different amounts of shear blocking. Screws were used to fasten the sheeting to the purlins and the purlins were connected to the rafters using nails. The cantilever diaphragms were each tested twice, with the first being bending moment failure and the second being shear failure. The simple beam diaphragms were only tested once for shear failure. Shear blocking increased the strength of the cantilever diaphragms by 15% and stiffness by 35%. Seam fasteners, used in the cantilever diaphragms, increased the strength by 30% and stiffness by 18%. Seam fasteners did not affect the strength or stiffness of the simple beam diaphragms, due to the mode of failure. When the purlin spacing was increased, from 24 inches to 30 inches, it decreased the strength of the cantilever diaphragms by 20% and the stiffness by 30%.
Degree
thesis:*- Name thesis:degree_name
- Master of Science (MS)
- Level thesis:degree_level
- Thesis - University Access Only
- Discipline thesis:degree_discipline
- Civil and Environmental Engineering
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Sawatzky, Corey
Identifiers
dc:identifier.*- Repository record dc:identifier
- https://openprairie.sdstate.edu/etd2/1292