Back to search

South Dakota State University

Titanium Dioxide Nanotubes : Fabrication, Morphology and Photovoltaic Studies

Abstract

dc:description.abstract

Dye-sensitized solar cells (DSCs) have emerged as a cost effective alternative to silicon solar cells. Typically DSCs use mesoporous titanium dioxide for electron transport which latter was realized to contribute towards recombination losses. One-dimensional nanotubeshave emerged as a potential alternative to the mesoporous TiO2 for providing one-dimensional electron transport and reduced recombination. N anotube based DSCs have several challenges such as the growth of highly ordered nanotubes, and optimization of their morphology to obtain efficiencies greater than those reported for nanoparticle based DSCs. The objective of this research was to develop a fast and reproducible technique to grow highly ordered nanotubes; use the nanotubes to fabricate a front illuminated solar cell and investigate the effect of nanotube morphology on the PV performance for higher efficiency. TiO2 nanotubes were grown by a potentistatic anodization technique. The morphology of nanotubes was studied using scanning electron microscopy (SEM). A comparative study of back illuminated and front illuminated nanotube based DSCs and the effect of different orientations of nanotubes on DSC performance was investigated using 1-V, EQE and electrochemicalimpedance spectroscopy (EIS) techniques. The crystalline phases of annealed Ti02 were investigated by XRD. V A novel chemical pretreatment for titanium substrates that allows the growth of highly oriented Ti02 nanotubes was developed. A novel liftoff technique for removing nanotube films from Ti substrates was developed along with a novel low temperature and high pressure technique for the fixation of this nanotube film on to transparent conducting· glass substrates to fabricate front illuminated _dye-sensitized solar cells. A novel DSC structure with open end down nanotubes for front illuminated cell was developed. This configuration had significantly higher efficiency (6.5%) than a closed end down nanotube structure (3.5%). Nanotube based DSCs had higher efficiency (6.5%) than similar cell with nanoparticles (5.4%) which suggests that nanotubes are more promising structure than the nanoparticle based DSCs due to less recombination along the nanotube length.In order to further improve the efficiency of nanotube based DSCs, dye loading in nanotube films should be increased by filling nanotubes with Ti02 nanoparticles.

Degree

thesis:*
Name thesis:degree_name
Doctor of Philosophy (PhD)
Level thesis:degree_level
Dissertation - University Access Only
Discipline thesis:degree_discipline
Electrical Engineering and Computer Science

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dubey, Mukel Kumar
Contributors dc:contributor
  • Hongshan He

Rights

dc:rights

Identifiers

dc:identifier.*
Repository record dc:identifier
https://openprairie.sdstate.edu/etd2/2109

Chain of custody

source
Harvested from
South Dakota State University
Base URL
openprairie.sdstate.edu/do/oai/
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
citation

Dubey, Mukel Kumar. Titanium Dioxide Nanotubes : Fabrication, Morphology and Photovoltaic Studies. Dissertation - University Access Only thesis, https://openprairie.sdstate.edu/etd2/2109