Universidad de Sevilla
Innovative energy storage concepts based on power-to-power solutions using micro gas turbines
Abstract
dc:description.abstractPower-to-Power is a process whereby the surplus of renewable power is stored as chemical energy in the formof hydrogen. Hydrogen can be used in situ or transported to the consumption node. When power is needed again, hydrogen can be consumed for power generation. Each of these processes incurs energy losses, leading to a certain round-trip efficiency (Energy Out/Energy In). Round-trip efficiency is calculated considering the following processes: water electrolysis for hydrogen production, compression, liquefaction or use of metal-hydride for hydrogen storage, fuel-cell-electric-truck for hydrogen distribution and micro-gas turbine for hydrogen power generation. From a first analysis of the commercial technologies available in the market, the achievable round-trip efficiency of the power-to-power energy storage system proposed is 29% when considering solid oxide electrolysis andmetal hydride storage. This number decreases sharply when using alkaline or proton exchange membrane electrolysers, 22.2% and 21.8% respectively. Round-trip efficiency is further reduced if considering other storage media, such as compressed- or liquefied-H2. Even if this is not positive, this thesis shows that there is a large margin to increase round-trip efficiency again, mostly through improvements in the hydrogen production process and the thermo-mechanical energy conversion step, which could lead to round-trip efficiencies of around 40%–42% in the next decade, for power-to-power energy storage systems based on micro gas turbines. By prioritising the development of a rapid techno-economic assessment tool, accuratemodels for the various components of the system have been successfully created and incorporated into a Python-based tool. The models encompass renewable energy sources such as PV Solar andWind Turbines, electrolyser technologies including proton-exchange membrane and solid oxide, a high-pressure storage system comprising volumetric compressors and high-pressure vessels, and the power block featuring a micro gas turbine. After completing the design modelling, a thorough examination of the economic aspects of each system is conducted. This involves conducting an extensive literature review and extracting relevant information regarding the capital and operational expenditures associated with renewable energy sources, electrolysers, compression systems, storage media, and micro-gas turbines. Additionally, various metrics are reported to assess the economic impact, including the levelised cost of hydrogen and energy, as well as the payback period and internal rate of return. The techno-economic assessment tool is put into practice for analysing an off-grid application with a continuous demand of 30 kWe for three European cities: Palermo, Frankfurt, and Newcastle. In the first part of the analysis, the results show that the latitude of the location is a very strong driver in determining the size of the system (footprint) and the amount of seasonal storage. The rated capacity of the PV plant and electrolyser is 37%/41% and 58%/64% higher in Frankfurt and Newcastle, respectively, as compared to the original design for Palermo. And not only this, but seasonal storage also increases largely from 3125 kg H2 to 5023 and 5920 kg H2. As a consequence of this, LCOE takes values of 0.86 €/kWh, 1.26 €/kWh, and 1.5 €/kWh for the three cities, respectively, whilst round-trip efficiency is approximately 15.7% for the three designs at the said cities. With the aim to reduce the footprint and rating of the different systems, two strategies are followed: hybridisation with other storage technologies and improvement of the electric efficiency of the power conversion unit. For the former, the system is hybridised with a battery energy storage system, leading to 20% LCOE reduction and 10% higher round-trip efficiency. For the latter, the incorporation of an ORC system as a waste-heat recovery system using the exhaust gases of the micro gas turbine is investigated. It is shown that a 30 kWe micro gas turbine can see efficiency rising from 27% to 42%. Analysing again the system with the incorporation of the battery storage system and the upgraded micro gas turbine yields 50% reduction of the PV solar system footprint, 60% reduction in the rated capacity of the electrolyser, and 40% reduction in the levelised cost of electricity. The present thesis effectively makes strides towards implementing power-to-power energy storage systems utilising micro gas turbines for off-grid applications. Moreover, by developing designmodels for each system component and integrating themwith an economic assessment, the thesis successfully identifies crucial parameters to be considered during the design process. Importantly, it highlightsweak areas that require further research and development to facilitate the successful deployment of the technology. This progress aims to achieve a minimal footprint and low LCOE while contributing to the wider adoption of renewable energy sources and the global fight against climate change.
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Escamilla Perejón, Antonio
- Advisors dc:contributor.advisor
-
- García Rodríguez, Lourdes
- Sánchez Martínez, David Tomás
Subjects
dc:subject × 7Rights
dc:rights.accessrights- Statement dc:rights.accessrights
-
- open access
- Attribution-NonCommercial-NoDerivatives 4.0 Internacional
- Licence dc:rights.uri
- Language dc:language.iso
- eng
Identifiers
dc:identifier.*- Dc Identifier Citation
- Escamilla Perejón, A. (2023). Innovative energy storage concepts based on power-to-power solutions using micro gas turbines. (Tesis Doctoral Inédita). Universidad de Sevilla, Sevilla.