Universidad de Sevilla
The calcium-looping process for advancing in the development of both C02 capture and thermochemical energy storage systems.
Abstract
dc:description.abstractThe Calcium-Looping process is based on the multicycle calcination-carbonation of calcium carbonate, which is one of the most abundant materials in the Earth. The process shows promising results facing to solve two of the main challenges within the future energy scenario: CO2 capture from fossil fuel combustion processes and energy storage in renewable-based plants. This thesis is focused in the assessment of the Calcium-Looping allowing a better understanding of the process integration for both applications. Post-combustion CO2 capture based on Calcium-Looping process consist of reacting the CO2 present in the flue gas exiting the fuel power plant with CaO particles according the carbonation reaction, which produces solid CaCO3 as product. CO2 capture efficiencies over 90% have been proved at MWth pilot-scale. After carbonation, solids are sent to a separated reactor where CaO is regenerated according the endothermic calcination reaction. The heat to carry out the reaction is provided by fuel oxy-fuel combustion to ensure a pure CO2 stream exiting the reactor, which after a purification process is ready to be stored or used in another process. The regenerated CaO is sent again to the carbonator reactor for a new CO2 capture cycle. On the other hand, by integrating the Calcium-Looping as thermochemical energy storage system in solar thermal power plants, the process starts performing the calcination reaction from concentrated solar power. CO2 and CaO streams produced are stored separately for later use. When energy is demanded, both components are brought together to the carbonator where the stored energy is released by the carbonation reaction. The carbonation is highly exothermic and therefore a proper integration of the heat released (i.e. for power production) is fundamental for the process efficiency. In spite that both applications are based on the same process, the specific operation conditions required leads to a different behaviour which suggest that the process must be analysed in detail according to each application. This thesis is focused on the development of models and process integration schemes based on lab-scale results under specific conditions selected from the analysis of the potential industrial scale implementation. It involves a multidisciplinary approach combining chemical reactions and process engineering to advance in the response of the challenges posed. This document is structured as follow: the first section introduces the reader to the Calcium- Looping applications, stressing the research opportunities that have motivated the present thesis. This leads to the formulation of the objectives of the work, which are addressed in the presentation and the discussion of the main results of the work. After the conclusions, new research lines to be faced in the near future are summarized.
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Ortiz Domínguez, Carlos
- Advisors dc:contributor.advisor
-
- Chacartegui, Ricardo
- Valverde Millán, José Manuel
Rights
dc:rights.accessrights- Statement dc:rights.accessrights
-
- open access
- Attribution-NonCommercial-NoDerivatives 4.0 Internacional
- Licence dc:rights.uri
- Language dc:language.iso
- eng
Identifiers
dc:identifier.*- Dc Identifier Citation
- Ortiz Dominguez, C. (2018). The calcium-looping process for advancing in the development of both C02 capture and thermochemical energy storage systems.. (Tesis Doctoral Inédita). Universidad de Sevilla, Sevilla.
- Mods Identifier Ror
- https://ror.org/03yxnpp24