Back to search

University of Southampton

In-situ conductivity, temperature, and dissolved oxygen (CT-DO) sensor system for marine measurement

Abstract

dc:description.abstract

This works describes the development of a miniature high accuracy, low power CT-DO sensor system for in-situ oceanographic measurements. The sensors were fabricated on glass wafers, using micro-fabrication techniques. Three chip designs were made. The sensors in designs 1 and 2 include a seven-electrode conductivity sensor set in a flow channel, a four-ring-electrode open conductivity sensor, a Platinum Resistance Thermometer (PRT) bridge temperature sensor, and a DO sensor based on a platinum electrode inset into five 25 ?m deep wells. A 16-bit impedance measurement circuit was made to support the CT sensor. This has a typical battery life of one month with 10 s sampling interval. The initial CT accuracies are ±0.01 mS/cm and ±0.003 ºC respectively. The seven-electrode conductivity sensor with channel suffered from a durability problem, which was discovered on a mid-Atlantic deployment. This problem was solved with the four-ring-electrode open conductivity and PRT bridge temperature sensor. Dock deployments and 8-week test in a calibration lab showed that the monthly drift was 0.02 mS/cm for the conductivity sensor, and less than 0.01 ºC for the temperature sensor.<br/><br/>The DO sensor was calibrated to have an initial accuracy of ±5 µm. A simple analytical model is proposed to estimate the effect of fluid flow. Tests show that the measured flow effect leads to an error of 1% DO, compared with an estimate of 10%. The complete CT-DO sensor was tested during a 75 day Indian Ocean cruise. A novel method of bio-fouling mitigation was tested utilizing electro-chemical reactions on the electrodes of the conductivity and DO sensors, and first results are promising. The CT system was also modified to measure low-conductivity solutions. This system was deployed in Greenland and results showed that the CT sensor can also work in fresh water and harsh environments. Future plans are to integrate the electronics into an ASIC, and to include a miniature sensor chip (design 3), to make a package the size of a pen for fish tag applications.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2011

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Huang, Xi
Advisor dc:contributor.advisor
  • Morgan, Hywel
ORCID person:identifier.orcid

Rights

Language dc:language.dcterms_iso639_2
eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Huang, Xi. In-situ conductivity, temperature, and dissolved oxygen (CT-DO) sensor system for marine measurement. doctoral thesis, University of Southampton, 2011.