Back to search

University of Southampton

High throughput synthesis and corrosion studies on alloys

Abstract

dc:description.abstract

A range of Ni-Cr, Ni-W, Al-Mg, and Al-Mg-Zr thin film alloys have been synthesised using a controllable compositional gradient method based on MBE sources allowing the deposition of compositional gradients of a large range of thin film materials. The alloy materials are characterised by X-ray diffraction, including phase identification and crystallite size, and energy dispersive x-ray spectroscopy (EDX). The corrosion resistance of 100 discrete alloy compositions has been measured simultaneously in identical environments using a high-throughput screening protocol based on cyclic voltammetry (CV). The corrosion resistances and potentials are extracted from voltametric data by both the Linear Polarisation Resistance (LPR) and Tafel Extrapolation methods. Results from these are shown to be consistent. In general, the corrosion (polarisation) resistance behaviour is shown to be directly related to the bulk alloy structures or morphologies. In the case of the NiCr alloys, besides the b.c.c ?-Cr (Im3m) phase and its Ni solid solutions, which exhibit the highest polarisation resistances, the ? Cr3Ni2 (P42/mnm) phase exhibits the next best polarisation resistance. The incorporation of W in the Ni-W solid solution at low W compositions resulted in a small reduction in corrosion resistance while a significant increase in the corrosion resistance was observed for alloy compositions greater than 24 %at. W. The best corrosion resistance of Al-Mg alloys was observed for alloy compositions comprise 35%at. Al, which corresponds to the formation of ? Al12Mg17 (i.e. also named ? phase). The incorporation of Zr in the Al-Mg resulted in forming five Al-Zr metastable phases i.e. Al3Zr, Al2Zr, Al3Zr2, Al4Zr5, and Al3Zr5. The Al-Mg-Zr alloys composition contained Al3Zr2 and Al3Zr5 exhibit highest cathodic activity, corrosion resistance, and passivity.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Aljohani, Talal
Advisor dc:contributor.advisor
  • Hayden, Brian E.
ORCID person:identifier.orcid

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Aljohani, Talal. High throughput synthesis and corrosion studies on alloys. doctoral thesis, University of Southampton, 2013.