Back to search

University of Southampton

Fatigue of friction stir welded AA2024-T351 plate

Abstract

dc:description.abstract

The fatigue crack initiation and propagation characteristics of Friction Stir Welds (FSW) and 13mm gauge 2024-T351 A1 alloy have been studied. Two failure locations have been identified: outside the weld nugget region and over the nugget region. The study shows that when failure occurs outside the nugget, fatigue crack growth is essentially conventional (mode I dominated), with initiation from S-phase particles. For failures over the nugget region initiations were linked to coarse intermetallics associated with macroscopic discontinuities in the weld flow pattern; with subsequent crack growth being seen to follow the curve of the banded structure within the weld nuggets region. A variety of microstructural and micromechanical contributions to fatigue failure have been identified, including the roles of local matrix ageing characteristics, intermetallic particle size and distributions, local flow stress characteristics and the residual stress distributions.<br/><br/>The effect of varying the welding parameters has also been studied in partial penetration 25mm gauge 2024-T351 Al alloy. Again, two failure locations have been identified: outside the weld nugget region and over the nugget region. Outside the nugget exhibited essentially conventional (mode I dominated) crack growth, with initiation occurring at S-phase particles. Failure over the nugget only occurred in samples from the slower of the two welding speeds, initiation was identified with linear defects at, or just below, the surface. Again a variety of microstructural and micromechanical facts were identified as having an influence on the subsequent growth, in particular the marked deflection from a conventional mode I path. The failure location however did not appear to significantly alter fatigue lives.<br/><br/><br/>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2003

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Booth, Diccon Philip Paul
Advisor dc:contributor.advisor
  • Sinclair, I.

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Booth, Diccon Philip Paul. Fatigue of friction stir welded AA2024-T351 plate. doctoral thesis, University of Southampton, 2003.