Back to search

University of Southampton

Analysis and design of SOI MEMS step up voltage converters

Abstract

dc:description.abstract

Energy harvesting systems are becoming an increasingly popular area for research as they present themselves as a clean, renewable source of energy. There are currently some key design issues facing the development of these energy harvesting systems. In particular, these harvesters often produce relatively low voltages compared to the requirements of the intended application. For example, scientific apparatus aboard orbital satellites require relatively high voltage levels for operation (kV) but are powered from solar panels providing substantially lower output voltages (24 V). In contrast, for low power energy harvesting, such as micro scale vibration energy harvesters, a harvested voltage level of ?0.5V is often required to power a low power sensor circuit which requires 2-5V.<br/><br/>Voltage multiplication is commonly achieved using charge pump multiplier circuits. However, these circuits are quite limited in both the range of multiplication (per unit area) and the maximum voltage level. This work aims to take advantage of a noticeable gap in the research field and is specifically targeted towards energy harvesting application areas.<br/><br/>This thesis presents a comprehensive analysis of novel bi-stable and resonant MEMS voltage step-up converters. The operation is based on isolating the charge of a mechanically variable capacitor and varying the gap between the electrodes by an appropriate method of actuation force. As the electrode gap varies, so does the voltage level across the electrodes. In the case of the bi-stable devices, electrostatic actuation is employed while the resonant devices rely on ambient vibration force. These have been specifically designed for integration with static and vibration energy harvesters respectively.<br/><br/>Prototype devices were fabricated using a dicing-free Silicon-on-Insulator (SOI) process developed at the Southampton Nanofabrication Centre. For the bi-stable device, a maximum output voltage of 35.7V was measured, using a 100M? load resistance, from a 24V input voltage. Further improvements in the design of the MEMS variable capacitor can be made in order to increase the capacitance level of the devices while reducing the parasitic fringing capacitance. Optimisation of the MEMS device would enable the output to reach a level near the theoretical maximum limit set at 120V.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2013

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gleeson, Rachel
Advisor dc:contributor.advisor
  • Kraft, Michael

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gleeson, Rachel. Analysis and design of SOI MEMS step up voltage converters. doctoral thesis, University of Southampton, 2013.