Back to search

University of Southampton

Analysis and control of nonlinear vibration in inertial actuators

Abstract

dc:description.abstract

Proof-mass actuators are typically used to supply a secondary control force to a supporting structure for the purpose of improving its performance through active vibration control. These devices comprise a magnetic proof-mass that accelerates in response to an input current, and the resulting inertia provides a reaction force on the actuator casing and the structure itself. Due to design constraints and the need to prevent actuator damage, the displacement of the proof-mass is usually bounded by its stroke length, which is determined by the distance between the actuator end stops. If the proof-mass reaches the end of the stroke, it will collide with the end stops, thereby imparting large shocks to the supporting structure that may destabilise the closed-loop system. This phenomenon, known as stroke saturation, is strongly nonlinear and invalidates the linear Nyquist stability criterion, which significantly complicates the assessment of closed-loop stability. As an example, stroke saturation may occur when using proof-mass actuators in active car suspensions, due to large impulsive forces from the road.<br/><br/>The aim of this thesis is to examine the dynamical behaviour of several proof-mass actuators using experimental measurements, including the effects of stroke saturation and other nonlinearities. The experimental data is used to establish a Simulink model of an inertial actuator by applying nonlinear identifcation techniques. It is found that the actuator dynamics can be represented using a nonlinear single-degree-of-freedom system, where the actuator nonlinearities are modelled using various polynomial and piecewise terms. This is conformed by comparing the model results with the experimental data.<br/><br/>Using the Simulink model, it is shown that the actuator nonlinearities significantly reduce the closed-loop gain margin by exploiting regions of potential instability that are present in the underlying linear closed-loop system. Therefore, the relationship between the actuator nonlinearities and the closed-loop stability depends on the choice of underlying linear controller, as the actuator nonlinearities tend to accentuate underlying stability issues rather than induce instability by themselves.<br/><br/>To prevent stroke saturation from destabilising the closed-loop system, an on-off control law may be applied by implementing a knock detector and deactivating the control signal for a short time period once stroke saturation is detected. Provided that a suitable deactivation period is specified, the on-off control law is able to prevent stroke saturation from destabilising the closed-loop system, thereby increasing the closed-loop gain margin.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wilmshurst, Laurence Ian
Advisor dc:contributor.advisor
  • Ghandchi Tehrani, M.

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wilmshurst, Laurence Ian. Analysis and control of nonlinear vibration in inertial actuators. doctoral thesis, University of Southampton, 2015.