University of Southampton
Waveguide lasers in ytterbium doped tantalum pentoxide for integrated photonic circuits
Abstract
dc:description.abstractThis thesis investigates ytterbium doped tantalum pentoxide as a material system for realising waveguide lasers on silicon substrate, as a basis to provide the next generation of mass-producible, low-cost planar devices with many interlocking photonic circuits for multi-functionality.<br/><br/>Numerical modelling of symmetrical rib waveguide in Ta<sub>2</sub>O<sub>5</sub> was carried out finding an optimum waveguide design for a near-circular mode profile with maximum confinement of light within the core with various etch depths and rib widths. A numerical study investigating the feasibility of integrated Kerr lens elements for future mode-locking was carried out, predicting that a Kerr lens slab with a length of 20 µm with input and out waveguides was able to achieve a 9% modulation depth for input intensity of 6 GW/m<sup>2</sup>.<br/><br/>Thin films were fabricated by RF magnetron sputtering onto a silicon substrate with 2.5 µm silica layer from a powder pressed Yb:Ta<sub>2</sub>O<sub>5</sub> target, with shallow rib waveguides realised using photolithography and ion beam milling. The excited-state lifetime of Yb:Ta<sub>2</sub>O<sub>5</sub> was measured to be 0.25 ± 0.03 ms, and peak emission and absorption cross-sections were determined to be 2.9 ± 0.7×10<sup>-20</sup> cm<sup>2</sup> and 2.75 ± 0.2×10<sup>-20</sup> cm<sup>2</sup> respectively, with the fluorescence spectrum giving a broadband emission from 990 nm to 1090 nm.<br/><br/>Finally a 10.8 mm long waveguide laser in Ta<sub>2</sub>O<sub>5 </sub>doped with ~ 6.2×10<sup>20</sup> Yb atoms/cm<sup>3</sup> of ytterbium oxide was demonstrated with a laser cavity formed from a combination of high reflective mirrors with output couplers or reflections from the bare end-facets with Fresnel reflectivity of 12%. In a 5.4 µm wide waveguide, lasing was observed between 1015 nm and 1030 nm when end-pumped with a 977 nm laser diode with the highest output power of 25 mW at a wavelength of 1025 nm with an absorbed pump power of 120 mW for a cavity formed by a high reflector mirror and a bare end-facet at the output. In this case, the absorbed pump power threshold and slope efficiency were measured to be ~ 30 mW and ~ 26% respectively. The results presented in this thesis demonstrate that tantalum pentoxide has great potential for mass-producible, integrated optical circuits on silicon using conventional CMOS fabrication technologies.
Degree
thesis:*- Name dc:type.qualificationname
- Ph.D.
- Level dc:type.qualificationlevel
- doctoral
- Grantor dc:publisher.institution
- University of Southampton
- Year dc:date.issued
- 2015
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Aghajani, Armen
- Advisor dc:contributor.advisor
-
- Wilkinson, James
- ORCID person:identifier.orcid
Rights
- Language dc:language
- English, eng