Back to search

University of Southampton

Correlations between structural and magnetic properties in powder and bulk Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> prepared using carbon chemical vapour doped boron and silica coated boron

Abstract

dc:description.abstract

The research project has been focused on the preparation and characterization of Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> powder and bulk samples using chemical vapour coated boron and silica coated boron by sol-gel method. The chemical vapour deposition of carbon on boron powder was achieved by reacting ethylene gas on high purity nano-sized boron particles (20-100nm diameter) with varying deposition temperatures and partial pressures. Undoped and carbon doped boron was then reacted with magnesium rod to produce both Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> powder and bulk samples. Transmission electron microscopy showed that the chemical vapour deposition achieved a uniformly thick carbon-rich layer on each particle, regardless of particle size. In addition, the analysis of the diffraction peaks and the characterization of the magnetisation has evidenced the coexistence of phases with different levels of carbon resulting in multiple current paths within the Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> samples. The study of the preparation process for bulk Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> samples has evidenced that reducing the difference between the time constant of reaction and the time constant of diffusion is crucial to obtain well-sintered samples devoid of cracks. Doping with carbon has shown significant improvements in the field dependence of J<sub>c</sub> for the Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> bulk samples reaching values comparable with the best literature-reported data for bulk samples. However, the J<sub>c</sub> values of the Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> bulk samples were observed to be noticeably lower when compared with the best literature-reported data for wires and tapes, owing to the greater density achievable in the latter. In contrast to the carbon doping, the coating with silica via sol-gel process was found to impair the in-field J<sub>c</sub> properties of Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2 </sub>bulk samples, presumably due to the huge amount of silica loaded onto the boron powder and to the formation of carbonate and silicate impurities within their reacted microstructure. <br/>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2015

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Paolella, Maurizio
Advisor dc:contributor.advisor
  • Young, Edward

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Paolella, Maurizio. Correlations between structural and magnetic properties in powder and bulk Mg(B<sub>1-x</sub>C<sub>x</sub>)<sub>2</sub> prepared using carbon chemical vapour doped boron and silica coated boron. doctoral thesis, University of Southampton, 2015.