Back to search

University of Southampton

Development of a dispenser printer to realise electroluminescent lamps on fabrics

Abstract

dc:description.abstract

Dispenser printed electroluminescent (EL) lamps on fabric have been investigated and a functional dispenser printed prototype that outperforms the commercial equivalent is presented. The state of the art in dispenser printing and screen-printing is considered and existing patents and prototype devices reviewed. No examples of printed electroluminescent lamps on fabric were found therefore providing an opportunity for novel work to be produced.<br/><br/>A simulation model of the dispenser printer was developed, allowing the best performing dispense pressure for a defined ink to be found. An experimental method for identifying a suitable dispense pressure was also compared to the simulation. The results showed that the experimental method offered the same results more quickly, so an experimental approach was selected.<br/><br/>The ability to print complex shapes was developed, enhancing the usefulness of the technology for a commercial application. A requirement for maintaining a constant separation between the substrate and the dispenser nozzle was discovered and this capability was integrated to allow the printing of complex shapes in a continuous print mode. Many displacement sensors were reviewed and a selection were tested before the Keyence LK-G10 was selected. The results from the Keyence profiles were validated against a commercial profilometer and the University of Southampton systen was found to fail to measure the transparent conducting layer although it could measure the transparent interface which the other displacement sensors could not.<br/><br/>Phosphor and transparent conducting layers were investigated and optimised solutions for different use scenarios such as different lamp colours are identified. The route the dispenser nozzle takes to fill a defined area with ink was investigated. The results recommended the rectilinear pattern at 70% density as the best performer out of five infill patterns tested.<br/>Novel dispenser printed EL lamps on fabric were demonstrated. The dispenser printed EL lamps were compared to University of Southampton screen-printed and commercial screen-printed EL lamps. The results showed the dispenser printed EL lamps outperformed the commercial lamps and had comparable performance to the University of Southampton screen-printed EL lamps.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • De Vos, Marc
Advisor dc:contributor.advisor
  • Tudor, Michael
ORCID person:identifier.orcid

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

De Vos, Marc. Development of a dispenser printer to realise electroluminescent lamps on fabrics. doctoral thesis, University of Southampton, 2016.