Back to search

University of Southampton

Active vibration control using a nonlinear inertial actuator

Abstract

dc:description.abstract

This thesis presents a theoretical and experimental study of a stroke limited inertial actuator used in active vibration control. The active control system under investigation consists of an inertial actuator attached to a lightweight flexible structure, a collocated vibration sensor and a velocity feedback controller (VFC). Since the control force is generated by accelerating the proof mass, controlling low frequency motions or large amplitude vibrations requires a very long stroke for the proof mass. One of the main limitations of inertial actuators is that the stroke length is finite, however. This not only limits the amount of force available from the actuator but also when the proof mass hits the end-stops it causes impulse-like excitations that are transmitted to the structure and may result in damage. Additionally, the shocks produced by the impacts between the proof mass and the end-stops are in phase with the velocity of the structure, leading to a reduction of the overall damping of the system, which can give rise to instability of the system and limit cycle oscillations.<br/><br/>This research examines the implementation of a nonlinear feedback controller to avoid collisions of the proof mass with the actuator’s end-stops, thus preventing this instability.<br/><br/>The nonlinear model of a stroke limited inertial actuator is first identified using base and direct excitation experiments and a parameter estimation process. A nonlinear feedback control (NLFC) strategy is then presented, which actively increases the internal damping of the actuator when the proof mass approaches the end-stops. The experimental implementation of the NLFC is investigated for the control of a cantilever beam, and it is shown that the robustness of the VFC system to external perturbations is much improved with the NLFC. Finally, a virtual sensing approach based on an extended Kalman filter algorithm is discussed for the real-time estimation of the states of the proof mass that is used to calculate the feedback signal of the NLFC. It is shown experimentally that larger velocity feedback gains can be used without the system becoming unstable when the NLFC is adopted and the theoretical reasons for this increase in stability margin are explored.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dal Borgo, Mattia
Advisor dc:contributor.advisor
  • Ghandchi Tehrani, Maryam

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dal Borgo, Mattia. Active vibration control using a nonlinear inertial actuator. doctoral thesis, University of Southampton, 2019.