Back to search

University of Southampton

Oxychalcogenides for transparent p-type conductors

Abstract

dc:description.abstract

The quinary layered oxychalcogenide, Sr<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub>, was used as a prototype to investigate the effect of composition and structure, on transparency and conductivity of analogous materials. A selection of analogues was computationally screened for predicted stability and optical transparency. The compounds Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> and Ca<sub>3</sub>Al<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> were both expected to show band gap energies higher than 3.1 eV and conductivities higher than that of the prototype. The compound Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> was successfully synthesised here by solid-state reaction at 800 <sup>o</sup>C for 12 h, apparently for the first time. Its measured band-gap energy was 3.24 eV. Synthesis of Ca<sub>3</sub>Al<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> was not achieved. It was concluded that a high-pressure synthetic route would be required to realise this compound.<br/><br/>The compounds intermediate between the prototype and new member BaxSr<sub>3</sub>-xSc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> where x = 1 and 2, were also successfully synthesised. Refinement of their crystal structures showed a preference of barium for the ‘intra-layer’ site in the perovskite layer, as rationalised by the Goldschmidt tolerance factor. The perovskite A site mixing yielded extreme bond distances and angles in the conductive copper sulfide layer of x = 2, beyond the range spanned by the end-members. Williamson-Hall analysis revealed increased strain and reduced crystallite size for the intermediates and general anisotropic growth of these compounds favouring the direction of conduction, as confirmed by scanning-electron microscopy.<br/><br/>The successful syntheses of the analogous compounds Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub>, Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>Se<sub>2</sub>, Ba<sub>3</sub>Y<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>Se<sub>2</sub>, Ba<sub>3</sub>In<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>Se<sub>2</sub>, Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Ag<sub>2</sub>Se<sub>2</sub> and Ba<sub>3</sub>In<sub>2</sub>O<sub>5</sub>Ag<sub>2</sub>Se<sub>2</sub> were also reported here, for the first time to the authors knowledge. It was found that the increased radius of the perovskite M cation, increased the basal lattice parameter and linked coinage metal-metal distance, expected to benefit transparency. However, observed reductions in band-gap energy for both the indium and yttrium analogues, relative to those of the scandium compounds, were rationalised by electronegativity and (n-1)d-orbital occupancy, respectively. The coinage metal-chalcogenide distance increased, and angle deviated from the ideal tetrahedral, with increasing M cation radius, in all cases. Barium and scandium proved to be the optimal candidate perovskite layer cations. Substitution of selenium and silver into the conductive layer was expected to increase conductivity at the expense of an observed decrease in band gap for the scandium analogues.<br/><br/>The compounds Ba<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S<sub>2</sub> and Ba3Sc2O5Cu2Se2 showed promise as improved transparent p-type conductors. Their compositions and structures suggested improved conductivity compared to that of Sr<sub>3</sub>Sc<sub>2</sub>O<sub>5</sub>Cu<sub>2</sub>S. The 3.05 eV band gap of Ba3Sc2O5Cu2Se2 may be increased above the visible light threshold by p-type doping. A preliminary investigation saw the prototype successfully doped by 5 at. % sodium with an accompanied Moss-Burstein shift in band gap energy of + 0.5 eV to 3.2 eV.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2019

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Limburn, Gregory James
Advisor dc:contributor.advisor
  • Hyett, Geoffrey
ORCID person:identifier.orcid

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Limburn, Gregory James. Oxychalcogenides for transparent p-type conductors. doctoral thesis, University of Southampton, 2019.