Back to search

University of Southampton

Cost-efficient delay-fault sensors for ageing prediction

Abstract

dc:description.abstract

Aggressive technology scaling has accelerated the ageing of CMOS devices. Ageing refers to a slow progressive degradation in the performance of MOS transistors. Consequently, the speed of a chip can significantly degrade over time; this results in delay faults. Dynamic reliability management schemes have been proposed to assure an IC's lifetime reliability. Such schemes are typically based on the use of ageing sensors to predict a circuit's failure before the actual errors appear. Existing ageing sensors are usually placed on the circuit's longest delay paths, which are deemed to be the most vulnerable to delay faults. Such an approach is very costly and may be infeasible in today's complex designs that typically have a large number of long delay paths that need to be monitored. Existing ageing models are proposed to estimate the lifetime of an IC before it's fabrication. However, The result is inaccurate without considering the actual operating conditions of the circuit. Various ageing mitigation technique has been proposed to extend the lifetime of an IC. A trade-off between lifetime and performance usually achieves such approaches. Such sacrifices are reluctant.<br/><br/>We propose two sensors, Parity Check Circuit (PCC) and Differential Multiple Error Detection Sensor (DMEDS), for cost-efficient delay fault monitoring. Both of those two sensors can monitor multiple paths simultaneously, which reduces the number of sensors significantly. The PCC has been designed and verified in a 65nm technology. Our results indicate that using the proposed sensor for delay fault monitoring in a 32-bit MIPS can lead to a significant saving in the area and power overheads, compared to the use of canary flip-flops [40]: by two-thirds and one-third, respectively. The DMEDS has been designed at transistor level in a 32 nm and 90 nm CMOS technology and verified at the system level. Our results indicate that the use of the proposed sensor for delay fault monitoring across ten paths can lead to a significant saving in area overhead compared to Razor [29], and Canary [40]: 87.59%, 77.67%, respectively. We also propose an idea of lifetime prediction system, and it compares the data with reference to analysis the ageing of the device. Our results indicate that the use of the proposed system for lifetime prediction system can accurately estimate the lifetime of the IC compared with the data from the ageing model. The error is controlled within 5% with limited reference data.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Sai, Gaole
Advisor dc:contributor.advisor
  • Zwolinski, Mark
ORCID person:identifier.orcid

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Sai, Gaole. Cost-efficient delay-fault sensors for ageing prediction. doctoral thesis, University of Southampton, 2018.