Back to search

University of Southampton

The squeeze casting of aluminium alloys and composites

Abstract

dc:description.abstract

<p>It is obviously important to understand the effect of pressure on the solidification parameters if improvements in properties obtained by squeeze casting are to be explained and maximised. The changes in the primary and secondary dendrite arm spacing that occurred during the solidification of aluminium 4.5wt% copper alloy and an aluminium copper eutectic alloy, allowed the morphology affecting variables V,G<sub>L</sub>,G<sub>S</sub>,h<sub>c</sub> to be quantified. These morphology affecting variables were also measured directly by producing castings in a specially designed die set. This work allowed the dominant production variables influencing the mechanical properties to be found. It was found that an applied pressure of 80MPa produced fully dense castings and that the highest rate of heat extraction was obtained in castings solidified with 120MPa. This places a maximum on the load required for a particular casting to be characterised as a squeeze casting. It was also found that the dominant factor affecting the microstructural and mechanical properties of an aluminium 4.5wt% copper squeeze casting is the pouring temperature. The minimum pouring temperature producing the smallest grain size and the highest mechanical properties. When castings are solidified under pressure many parameters that have well defined values at atmospheric pressure change. Some of these changes can be calculated from simple theory; for example, the changes in the liquidus and solidus temperatures, diffusion coefficient and thermal conductivity can all be estimated. The changes in liquidus and solidus temperature allow phase diagrams to be drawn at any applied pressure. The aluminium silicon system was used and a phase diagram was constructed for an applied pressure of 120MPa, the diagram was verified experimentally by casting produced in a range of different aluminium silicon alloys. The squeeze casting process allows pore free metal matrix composites to be produced. In this work a range of 7010/Saffil M.M.C's. were produced and their mechanical properties evaluated. Properties measured included tensile, fatigue and fracture toughness.</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
1990

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Musson, Nicholas John

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Musson, Nicholas John. The squeeze casting of aluminium alloys and composites. doctoral thesis, University of Southampton, 1990.