Back to search

University of Southampton

Stability of thin film insertion electrodes

Abstract

dc:description.abstract

<p>This work investigated the effect of inserting and extracting lithium from metal oxides used in an electrochromic device. Both the electrochromic (tungsten oxide) electrode and the vanadium-titanium oxide electrode were studied separately. The electrochemical behaviour of these electrodes was studied using slow scan cyclic voltammetry and AC-impedance spectroscopy. Scanning electron microscopy was used to study the surface of the electrode before and after cycling. Vanadium-titanium oxide samples were also studied using electrochemical quartz crystal microbalance.</p><p>Two forms of tungsten oxide were studied: amorphous and crystalline tungsten oxide samples. Normal conditions for the electrochemical study of tungsten oxide electrodes were defined by a potential range of 2 V <i>vs. </i>Li/Li<sup>+</sup> to 4.5 V<i> vs.</i> Li/Li<sup>+</sup>. The samples were then cycled to potentials as low as 1.6 V <i>vs. </i>Li/Li<sup>+</sup>. The amorphous samples showed a very poor stability at these potentials where crystalline samples showed a good stability. A model was proposed where the adhesion between the oxide layer and the underlying conductive layer is a key factor. Inserting lithium at very low potential causes an expansion of the film. When the strain forces exceed the adhesion forces, the expansion of the film causes film detachment. By heating the samples to get the crystalline form of tungsten oxide, the adhesion properties of the film and thus its stability upon lithium insertion-extraction are improved.</p><p>The electrochemical behaviour of tungsten oxide was studied using slow scan cyclic voltammetry, which showed a parasitic reaction superimposed on the insertion/extraction current. The quartz crystal microbalance <i>in-situ</i> measurements showed that hydrated lithium is inserted under mild conditions (above 3.2 v <i>vs. </i>Li/Li<sup>+</sup>).</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Gavanier, Béatrice

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Gavanier, Béatrice. Stability of thin film insertion electrodes. doctoral thesis, University of Southampton, 2000.