Back to search

University of Southampton

Sensorless control of brushless DC motor using back EMF commutation

Abstract

dc:description.abstract

<p>Brushless dc motors require rotor position information for commutation and speed control. Resolvers, encoders or Hall effect devices are often used but they increase cost and size of the system. Therefore, a great deal of work on sensorless control of brushless dc motor has been carried out for a few years. This report describes the principles and implementation of a sensorless control system using the principle of Back Electromotive Force (back emf) Commutation. As the proposed control scheme uses an open loop procedure to start the motor, the open loop to closed loop transition has been investigated. The system allows a rehable control and reversal of the motor, even at low speed. The implementation of the control algorithm in a TMS320F240 DSP is described. The test results on a 20 V, 10000 rpm, two-poles motor have been found satisfactory when run with no load. The load tests, made by holding the shaft, showed that the motor sometimes stopped at low speed.</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2000

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Bomassi, David

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Bomassi, David. Sensorless control of brushless DC motor using back EMF commutation. doctoral thesis, University of Southampton, 2000.