Back to search

University of Southampton

Numerical predictions and experimental analysis of small clearance ratio Taylor-Couette flows

Abstract

dc:description.abstract

<p>An integrated electrical thruster unit for use with work-class under water vehicles has a gap between two cylinders with the inner one rotating resulting in Taylor-Couette flow. It has a small clearance ratio with low Reynolds number turbulent Taylor vortices. To assess the frictional loss in the gap empirical equations were compared, but these show large discrepancies for the small gaps present in the thruster. From these empirical relations a 2mm gap was chosen for the design of the thruster unit. Published literature indicates that the start-up conditions affect the torque due to different Taylor vortex length and also raises questions about the existence of Görtler-type vortices within the turbulent Taylor vortices.</p> <p>To analyse the flow an experimental rig was designed and constructed with a dynamically similar clearance ratio with a gap of 10mm and an inner radius of 710mm. The presence of Taylor vortices was clearly demonstrated, using bubbles to visualise the flow. A novel method of analysing the bubbles as a probability spectrum, to measure Taylor vortex length, has been developed. The friction resistance has been measured, demonstrating the empirical equations are approximately correct, from analysis of the power lost in the motor used to drive the rig and dynamometry attached to the outer cylinder.</p> <p>The laminar flow has been successfully modelled with ELMORE, an in-house finite volume Navier-Stokes code with grid independent solutions. Studies were carried out on the effect of Reynolds number and end boundaries conditions on flow properties. These proved that if the vortex size is that of a critical length then the skin friction was the highest, unless adjacent to the end wall. It was also shown that is was possible to model just one vortex between two mirror boundaries.</p> <p>Turbulent Taylor vortices have been studied using the low Reynolds number <i>k-w</i> formulation using ELMORE and CFX, a commercial, finite volume CFD code. Grid independent results for three radius ratios tested have explained a turbulent flow transition between turbulent two states. For pre-transition the turbulence production is dominated by the outflowing boundary of the Taylor vortex. As the Reynolds number increases, shear driven turbulence, (due to the rotating cylinder) becomes the dominating factor. The effect of Taylor vortex length on skin friction and vortex strength has been evaluated using ELMORE.</p> <p>The domain has been extended to that of the full geometry, by implementing ELMORE as a parallel solver, to demonstrate the open end effects. These have allowed a comparison of the pressure with the bubble distributions from the experimental results. The transient start-up problem has been solved using a parallel 2-D DNS approach. Although in 2-D, it clearly shows that Görtler vortices are initially present and evolve into stable turbulent Taylor vortices. Four distinct steps have been identified as this flow develops.</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2002

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Batten, William Michael John

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Batten, William Michael John. Numerical predictions and experimental analysis of small clearance ratio Taylor-Couette flows. doctoral thesis, University of Southampton, 2002.