Back to search

University of Southampton

The fabrication, thermomechanical processing and characterisation of high temperature superconducting Bi-2212 tapes for applications

Abstract

dc:description.abstract

<p>The design and construction of High Temperature Superconducting (HTSC) devices requires long lengths of tape, high critical current densities (J<sub>c</sub>), and good mechanical characteristics. This work focuses on two areas; firstly the influence of the heat treatment parameters on J<sub>c,</sub> and secondly the bending strain tolerance of Bi-2212 and Bi-2223 tapes.</p> <p>Bi-2212 tapes have been partially melt processed using a fast final cooling schedule in a purpose built water cooled furnace in oxygen atmosphere. The J<sub>c77K </sub>of both AgMg-sheathed multifilamentary and Ag-sheathed monocore tapes is observed to increase dramatically with a final cooling rate of 800°C/hr. This increase is attributed to the lower oxygen content of fast cooled samples and the consequent effect on T<sub>c</sub>.</p> <p>The bend strain dependence of the transport critical current I<sub>c</sub> has been studied for Bi-2212 and Bi-2223 multifilament tapes at 77K, 65K and 4.2K. Two methods are described for producing the bend strain. The first, an <i>in-situ </i>cold bend at the measurement temperature; and the second an <i>ex-situ</i> warm bend where samples are bent at room temperature and then cooled for transport measurements. The differences between the two measurements are discussed, as is the dependence of the bending strain characteristic on the measured temperature. Optical and SEM investigations of the microstructure of bent tapes are presented.</p> <p>40%wt silver added Bi-2212 monocore tapes have been fabricated and the details of the manufacture and processing are presented. The addition of large (45-125&mu;m) silver particles into the precursor powder resulted in a novel core configuration. These silver particles flattened upon rolling, producing a connected system of core filaments, yielding a high J<sub>c</sub> in comparison to a non-silver added monocore control tape. The silver added tapes showed bend strain tolerance characteristics comparable with multifilament tapes, with the advantage of a single production step. Optical and SEM micrographs are presented of both standard monocore Bi-2212 and the silver added tapes under bending.</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2004

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Dudley, Richard Anthony

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Dudley, Richard Anthony. The fabrication, thermomechanical processing and characterisation of high temperature superconducting Bi-2212 tapes for applications. doctoral thesis, University of Southampton, 2004.