Back to search

University of Southampton

Controlled surface modification of supported platinum group metal catalysts

Abstract

dc:description.abstract

<p>The development of proton exchange membrane fuel cell (PEMFC) technologies relies upon many catalytic processes. The ability to specifically modify the surface of a catalyst with a secondary metal is beneficial as it could lead to increased performance and improved mechanistic knowledge.</p> <p>Co and Cr surface modified Pt/C catalysts have been prepared by the controlled surface reaction between the reduced Pt surface and an organometallic precursor of the secondary metal. It was found, using X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and transmission electron microscopy (TEM) that the secondary metal was targeting the Pt surface sites, but that additional heat treatments were required to form an alloy. Oxygen reduction testing using a rotating disk electrode (RDE) demonstrated that the Pt<sub>3</sub>M alloy phase was required for the catalysts to exhibit a 2 to 3 fold enhancement towards the ORR. No enhancement was observed when the secondary metal was present at the surface of the catalyst in an unalloyed state. Pt modified Pd/C catalysts were prepared to reduce the Pt metal content whilst retaining its catalytic activity towards the oxygen reduction reaction (ORR). The Pt mass activities of the Pt/Pd/C catalysts towards the ORR were less than the 40 wt% Pt/C catalyst used as a comparison. It is believed that a larger Pd core particle is required to achieve improved Pt mass activities.</p> <p>CeO<sub>x</sub>/Pt/Al<sub>2</sub>O<sub>3</sub> catalysts were prepared for the water gas shift reaction and offered improved performance in comparison to Pt/Al<sub>2</sub>O<sub>3</sub>, but less than Pt/CeO<sub>2</sub>. X-ray absorption near edge spectroscopy (XANES) was used to confirm that Pt facilitated the reduction of Ce(IV) to Ce(III) in atmospheres of air, H<sub>2</sub> and CO. It is proposed that the increase in activity observed on increasing the CeO<sub>x</sub> loading is consistent with the formate mechanism</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2007

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wells, Peter Philip

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wells, Peter Philip. Controlled surface modification of supported platinum group metal catalysts. doctoral thesis, University of Southampton, 2007.