Back to search

University of Southampton

Studies of stability and catalytic activity of lead dioxide electrodes

Abstract

dc:description.abstract

<p>The electrodeposition of stable and active, thick layers of pure and doped &#946;;-lead dioxide (PbO<sub>2</sub>) coatings from acidic nitrate baths onto gold and titanium substrates has been investigated. The morphology of the coatings has been analysed by Scanning Electron Microscopy (SEM) and the composition determined by Energy Dispersive X-ray Analysis (EDAX). In addition, the behaviour of the coated electrodes as anodes (using dimethylsulfoxide, DMSO, as a model substrate) and on open circuit has been defined.</p> <p>The structure and morphology of the &#946;;-PbO<sub>2</sub> deposits on both Au and Ti substrates depend strongly on the deposition conditions including temperature, current density, deposition charge and the bath composition (Pb(II) concentration, H<sup>+</sup> concentration, concentration and choice of dopant ions). Satisfactory deposits on Ti require pre-etching of the Ti surface and very careful selection of the deposition conditions to avoid the presence of resistive TiO<sub>2</sub> layers. It was confirmed the activity of the &#946;;-PbO<sub>2</sub> electrodes for the oxidation of organic compounds was significantly enhanced by the incorporation of bismuth. Bi-PbO<sub>2</sub> on Au was easily produced but on Ti it required a strategy involving the deposition of two layers. The procedures could be employed to produce uniform coatings on fine Ti meshes, a first stage in the design of three dimensional PbO<sub>2</sub> electrodes. The preferred coating on the Ti meshes was produced by the deposition of (a) an underlayer of Fe-F-PbO<sub>2</sub> onto etched Ti using 5 mA cm<sup>-2</sup> for 1800 s from 0.5 M Pb(NO<sub>3</sub>)<sub>2</sub> M Pb(NO<sub>3</sub>)<sub>2</sub> + 0.1 M HNO<sub>3</sub> + 0.04 M NaF + 10 mM Fe(NO<sub>3</sub>)<sub>3</sub> (b) a top layer of Bi-PbO<sub>2</sub> using a low current density ~ 0.5 mA cm<sup>-2</sup> from 0.5 M Pb(NO<sub>3</sub>)<sub>2</sub> + 1 M HNO<sub>3</sub> + 10 mM Bi(NO<sub>3</sub>)<sub>3</sub>. The coated Ti meshes were demonstrated to be suitable for the anodic decolouration of dyes (reactive blue 4, methyl orange, bromothymol blue and cresol red).</p>

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2006

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Mohd, Yusairie

Rights

Language dc:language
English, eng

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Mohd, Yusairie. Studies of stability and catalytic activity of lead dioxide electrodes. doctoral thesis, University of Southampton, 2006.