University of Southampton
Silicon photonics-compatible integrated optomechanical platforms for optical sensing
Abstract
dc:description.abstractIntegrated optomechanical systems provide a promising route toward compact and power-efficient technologies for sensing-related applications. Silicon photonic platforms enable strong light--matter interaction, mature on-chip optical interfacing, and scalable integration, while maintaining compatibility with CMOS fabrication processes. However, the performance and stability of many existing devices remain limited by mechanical dissipation, thermally induced effects, and the sensitivity of coupled optomechanical dynamics to fabrication imperfections. This thesis addresses these challenges by investigating optomechanical interactions in integrated silicon platforms from the perspectives of physical operating regimes, environmental perturbations, and fabrication constraints, establishing a coherent trajectory that logically moves from application-driven device physics to multi-physics mechanisms and processing paradigm shifts.<br/><br/>The first part of the thesis builds system-level feasibility by examining optomechanical self-oscillation in a silicon racetrack resonator incorporating a suspended nanobeam. Self-sustained mechanical oscillation is experimentally observed under continuous-wave optical excitation, without external electrical actuation. The oscillation dynamics, including the appearance of higher-order spectral components, are characterised and interpreted within a low-megahertz operating regime motivated by system-level timing constraints relevant to distributed fibre-optic sensing. Rather than pursuing optimised signal generation, the specific contribution of this study lies in systematically characterising and defining this targeted low-frequency operating window in a system-oriented context, thereby bridging the gap between device-level cavity optomechanics and practical sensing network requirements.<br/><br/>While this single-resonator platform demonstrates foundational feasibility, transitioning toward ultra-sensitive environmental monitoring necessitates advancing from isolated devices to multi-cavity interactions. To this end, the second part of the thesis investigates mode localization in a pair of weakly coupled optomechanical resonators integrated on a silicon photonic platform. Pronounced redistribution of mechanical vibration amplitude is observed in response to changes in ambient pressure, while the corresponding resonance frequencies exhibit only minor variations. By extracting effective stiffness parameters from measured eigenfrequencies and combining experimental results with thermal analysis, the localization behaviour is traced to a pressure-dependent stiffness imbalance arising from optically induced heating and pressure-dependent heat dissipation. This work reports the observation of mode localization in an on-chip optomechanical system and links its pressure-tunable behaviour to a pressure-dependent stiffness imbalance arising from optically induced heating and gas-mediated heat dissipation. This analysis clarifies the precise multi-physics coupling mechanisms governing its pressure-tunable behaviour, translating empirical spectral shifts into a specific physical mechanism.<br/><br/>The experimental insights from these planar devices reveal that the fundamental scaling ceiling and mechanical quality factors of such sensors remain tightly bounded by the geometric limitations and fragility of traditional two-dimensional (2D) suspended nanobeams. To transcend these fabrication-derived constraints, the final part of the thesis addresses fabrication constraints associated with mechanically compliant optomechanical structures. Motivated by the limitations of planar, doubly clamped beam geometries and the fabrication challenges associated with mechanically robust alternatives, a high-aspect-ratio deep reactive ion etching (DRIE) platform is developed to enable a transition from predominantly planar (2D) nanobeam devices toward vertically structured (3D) silicon microarchitectures while remaining compatible with silicon photonic integration. Wafer-scale silicon micropillar arrays are employed as a fabrication stress-test structure to evaluate etch uniformity, profile fidelity, and scalability across the wafer. The demonstrated process overcomes key limitations of conventional reactive ion etching and enables the reliable fabrication of high-aspect-ratio silicon microstructures relevant to future optomechanical implementations.<br/><br/>Overall, this thesis establishes a coherent framework that combines experimental observation, physical interpretation, and fabrication development to advance the understanding of optomechanical interactions in silicon photonic platforms. By explicitly addressing operating regimes, perturbation mechanisms, and manufacturability, the work provides a foundation for future studies of stable and scalable integrated optomechanical systems for sensing and related applications.<br/>
Degree
thesis:*- Name dc:type.qualificationname
- Ph.D.
- Level dc:type.qualificationlevel
- doctoral
- Grantor dc:publisher.institution
- University of Southampton
- Year dc:date.issued
- 2026
Author and committee
dc:creator, dc:contributor.*- Author dc:creator
-
- Jin, Weilin
- Advisor dc:contributor.advisor
-
- Yan, Jize
- ORCID person:identifier.orcid
Rights
- Language dc:language
- English, eng
Identifiers
dc:identifier.*- DOI dc:identifier.doi
- https://doi.org/10.5258/SOTON/PG/T269