Back to search

University of Southampton

Mechanisms and characteristics of leak noise in pipelines

Abstract

dc:description.abstract

Leakage from water distribution networks results in substantial economic, environmental and operational consequences, while the development of an initially small defect into a disruptive pipe burst presents a further risk to the reliability of water supplies. Acoustic techniques are widely applied for detecting and locating leaks; however, the physical mechanisms governing leak-noise generation and the dependence of the measured acoustic signal on defect geometry remain insufficiently understood. This limits the interpretation of acoustic measurements beyond the binary identification of leakage. This thesis investigates the hydraulic and hydrodynamic characteristics of leakage discharge flow and determines how these characteristics govern the generation and spectral behaviour of the resulting acoustic pressure field.<br/>A combined analytical, numerical and experimental methodology is adopted. Analytical orifice-flow models and validated Reynolds-averaged Navier-Stokes simulations are used to characterise compressible and incompressible leakage discharge across different flow regimes. A purpose-designed compressed-air pipe rig incorporating interchangeable leakage geometries is developed to isolate the leak-generated acoustic field. Approximately 60 aperture geometries are examined over a range of internal pressures, producing approximately 1,200 acoustic measurements. Hot-wire anemometry, simultaneous internal and external pressure measurements, wall-pressure measurements, coherence analysis and scale-resolving numerical simulations are subsequently employed to investigate the relationship between aperture geometry, shear-layer development and acoustic radiation.<br/>The external leakage flow exhibits the principal characteristics of a turbulent jet, including a contracted potential core and an expanding shear-layer. Its near-field pressure is predominantly associated with quadrupole-type turbulent mixing noise, while coherence between the internal and external pressure fields indicates that preferred jet instabilities contribute to both measurement domains.<br/>For circular apertures, the internally radiated pressure exhibits distinct low-, intermediate- and high-frequency behaviours. The intermediate-frequency response is strongly influenced by shear-layer separation and its interaction with the aperture wall, producing a velocity-dependent transition in the noise-generation behaviour. The maximum pressure level occurs at a thickness-to-diameter ratio of approximately 0.5, separating thin-orifice and thick-orifice flow regimes. A compact monopole model is developed in which fluctuating mass flow over the orifice inner surface radiates into the pipe. For representative circular geometries, the predicted, simulated and measured spectra agree within approximately 5 dB below the first radial-mode cut-on frequency.<br/>The slit-aperture investigation further demonstrates that acoustic pressure is not governed by aperture area alone. Slit orientation, width, length and thickness-to-width ratio modify the separated shear-layers and consequently the spectral characteristics of the internally radiated pressure. Circumferential slits generate the highest pressure levels among equal-area geometries. Nevertheless, when slit length is varied while width and wall thickness remain constant, the pressure amplitude scales with aperture area up to the pure plane wave propagation cut-off frequency because the governing discharge-flow structure is preserved.<br/>Overall, the research establishes a physically based relationship between leakage geometry, discharge flow hydrodynamics and acoustic source generation. The findings distinguish the turbulent-jet mechanism governing the external field from the fluctuating mass-flow mechanism governing the internal field and identify shear-layer development as the principal connection between aperture geometry and acoustic source strength. The resulting framework extends acoustic leak monitoring towards the characterisation of defect condition and provides a foundation for future investigations of leak-to-burst development and real-time acoustic prognosis.

Degree

thesis:*
Name dc:type.qualificationname
Ph.D.
Level dc:type.qualificationlevel
doctoral
Grantor dc:publisher.institution
University of Southampton
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Khodayari, Shahab
Advisors dc:contributor.advisor
  • Muggleton, Jen
  • Joseph, Phillip
ORCID person:identifier.orcid

Rights

Language dc:language
English, eng

Identifiers

dc:identifier.*

Chain of custody

source
Harvested from
University of Southampton
Base URL
eprints.soton.ac.uk/cgi/oai2
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Khodayari, Shahab. Mechanisms and characteristics of leak noise in pipelines. doctoral thesis, University of Southampton, 2026. https://doi.org/10.5258/SOTON/01/T324