Back to search

University of Strathclyde

Computation and verification of workpiece shape in electrochemical machining

Abstract

dc:description.abstract

This investigation was motivated by the need for accurate prediction of electrochemical machined surfaces relative to corresponding tool geometries for given sets of machining parameters. A mathematical model was formulated which simulates the electrochemical erosion achieved by primary current distribution under steady tool feed rate, but with correction for variable efficiency. The equations comprising the mathematical model were programmed for solution by a digital computer, using discrete steps and a quasi-steady approach. The model was not completely analytical; it utilised an empirical values for specific metal removal rates. The efficiency of machining with NaNO? electrolyte was estimated from experimental results of other investigators. To assess the validity of the model, drilling test runs were performed with tubular electrodes having two geometries at the leading edge of the tool. Work specimens were made out of EN58J stainless steel, both NaC1 and NaNO? electrolytes were used. The correlation between experimentally obtained drilled surfaces and the computer predicted surfaces were satisfactory, justifying the assumptions made during the development of the model and the numerical methods of the solution used. This investigation has provided a method which could be successfully employed to predict the electrochemically machined profiles relative to tool geometries. This undoubtedly helps the production engineer in achieving the desired tolerances of the finished component eliminating the high cost of trial and error techniques.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
1977

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Nanayakkara, M. B.

Rights

Identifiers

dc:identifier.*
Identifier
uk.bl.ethos.262029
T3198

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-21
Source record
OAI-PMH GetRecord
related terms
citation

Nanayakkara, M. B.. Computation and verification of workpiece shape in electrochemical machining. doctoral-pg thesis, University of Strathclyde, 1977. https://stax.strath.ac.uk/concern/theses/4b29b610g