Back to search

University of Strathclyde

Incremental equal channel angular pressing at elevated temperatures of Al 5083 and follow-up backward micro-extrusion of components

Abstract

dc:description.abstract

The demand for micro products has been continuously increasing over theyears. Many industries, including telecommunications, automotive, and medical fields,need small and precise micro parts. However, the main challenge lies in manufacturingthese microparts using the most suitable process. One promising option is backwardmicro-extrusion, which is characterised by low material consumption, low forcerequirements, and high production rates compared to forward micro-extrusion.Nevertheless, the formability and surface finish of the micro parts depend greatly onthe condition of the material and the process parameters.This study focuses on producing miniature conical pins, and two importantresearch questions arise. The first concerns which types of materials produce betterfinal conditions of microparts, while the second examines the effects of processingbackward micro-extrusion at elevated temperatures on product quality. The answersto these questions involve addressing the key challenges, determining the suitablematerial condition, which is ultrafine-grained (UFG) materials, and identifying theoptimal process temperature in microforming.The Incremental Equal Channel Angular Pressing (I-ECAP) method was usedto produce UFG Al 5083 material. It was processed at 200 °C using route BC and a diewith a 90° channel angle, using the as-received Al 5083. For backward microextrusion, the process parameters included temperatures (RT, 200 °C, and 250?°C), apunch displacement of 1.0?mm, and a process time of 200?s.UFG structures were successfully produced with average grain sizes of 0.49µm and 0.45 µm after four and eight passes of I-ECAP, respectively. The compressionyield strength of UFG Al 5083 was reduced by about three times as the testingtemperature increased from 200 °C to 250 °C. Consequently, the height of the conicalpins achieved ranged from 80% to 100% of the cavity height for all specimens at 250°C. The average height of conical pins at 250 °C was around 1.5 times higher comparedto those at 200 °C. The results confirmed that backward micro-extrusion at elevatedtemperatures using UFG materials produced better filling, improved surface finish,and a lower extrusion load compared to coarse-grained materials.This study contributes new knowledge on the relationship between grain sizeand temperature in relation to the microforming behaviour of Al 5083. Thecombination of I-ECAP and backward micro-extrusion presents a novel approach toproducing high-quality microparts.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Katimon, Mohd Nizam Bin
Advisors dc:contributor.advisor
  • Rosochowski, Andrzej
  • Qin, Y. (Yi)
  • Xie, Wenkun
Author Identifier dc:creator.authoridentifier
  • 201160254

Rights

Identifiers

dc:identifier.*
Identifier
T17653

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Katimon, Mohd Nizam Bin. Incremental equal channel angular pressing at elevated temperatures of Al 5083 and follow-up backward micro-extrusion of components. doctoral-pg thesis, University of Strathclyde, 2026. https://stax.strath.ac.uk/concern/theses/5h73pw714