Back to search

University of Strathclyde

Friction Stir Welding (FSW) of dissimilar metals and alloys

Abstract

dc:description.abstract

This thesis presents a comprehensive investigation into the Friction Stir Welding (FSW)process of dissimilar materials, specifically aluminium and copper. The researchemployed a combination of experimental and numerical methods to evaluate the weldquality through metallurgical and mechanical analyses. Finite Element (FE) methodswere utilised as an auxiliary tool, supplementing the experimental work to simulate theFSW process and facilitating the prediction of IMCs formation.The study begins with a literature review emphasising the importance of placing copperon the advancing side (AS) to achieve defect-free dissimilar aluminium to copper FSWjoints. However, tool offsetting on the retreating side (RS) or AS was found impracticalfor industrial applications due to varying tool offsets. Alternatively, researchersachieved defect-free joints by placing aluminium on the AS without tool offset.However, limited research has focused on this configuration, despite its benefits forjoint mechanical properties. Further investigation is needed to understand therelationship between intermetallic compound microstructure and mechanical properties.To address these gaps, the research focused on dissimilar FSW between AA5083aluminium and copper, exploring the influence of tool rotational and traverse speeds onjoint quality without introducing tool offsetting. The findings revealed successful weldjoints between the dissimilar materials using specific parameter combinations,including rotational speed levels of 1000 rpm (at welding speeds of 100 and 120mm/min), 1200 rpm (at 80 mm/min), and 1400 rpm (at welding speeds of 80 and 120mm/min). An inhomogeneous microstructure was observed within the weld, with thepredominant intermetallic compounds (IMCs) identified as Al2Cu and Al4Cu9. The volume fraction of IMCs increased with higher tool rotational speeds, leading toimproved ultimate tensile strength (UTS) and joint efficiency.Additionally, the study employed a novel approach to predict and validate the formationof IMCs during FSW of AA6061 aluminium to copper. The use of a Coupled EulerianLagrangian (CEL) model, combined with a modified friction law, provided goodagreement with experimental data. The predicted IMCs, including AlCu, Al2Cu, andAl4Cu9, were confirmed through the comparison of temperature distribution, Al-Cuphase diagram, and elemental concentration. The research demonstrated that defect-freejoints could be achieved at specific rotational speeds and traverse speed, where thesofter material (AA6061) was placed on the AS.Furthermore, the research focused on optimising the FSW parameters for dissimilarjoints between AA5083 and copper using the Taguchi design of experiments (DoE)method. By considering tool rotational speed, welding speed, and FSW tool design, thestudy successfully identified the significant parameters affecting joint mechanicalstrength. The optimised parameter combinations resulted in enhanced UTS, and flexurestress compared to the initial parameter sets. Linear regression analysis furtherconfirmed the agreement between predicted and actual values of UTS and flexure stress.Finally, the study investigated the influence of different aluminium grades (AA5083and AA6061) on dissimilar FSW of aluminium to magnesium AZ31B. Placing thesofter material (AZ31B) on the AS consistently produced defect-free joints, and thejoint mechanical strength improved when AZ31B was joined to the harder aluminiumgrade (AA6061). The presence of intermetallic compounds, such as Al3Mg2 and Al12Mg17, contributed to higher hardness values in the weld nugget, resulting inimproved joint mechanical efficiency.The findings of this research have advanced the understanding of dissimilar materialsFSW and provided insights into optimising the FSW process parameters for enhancedjoint quality. The conclusions drawn from this study offer valuable guidance for futureresearch and advancements in the field of dissimilar materials FSW process.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2025

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Karrar, Gihad
Advisors dc:contributor.advisor
  • Toumpis, Athanasios
  • Galloway, Alex
Author Identifier dc:creator.authoridentifier
  • 201853923

Rights

Identifiers

dc:identifier.*
Identifier
T17268

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Karrar, Gihad. Friction Stir Welding (FSW) of dissimilar metals and alloys. doctoral-pg thesis, University of Strathclyde, 2025. https://stax.strath.ac.uk/concern/theses/d504rk92b