Back to search

University of Strathclyde

?-recrystallisation characteristics of ? + ? titanium alloys for aerospace applications

Abstract

dc:description.abstract

As a function of the complex thermomechanical processing history that preceded it, the microstructure and microtexure in the final application of an ?+? titanium alloy governs the mechanical properties it exhibits. Crucial during the early stages of processing ? + ? titanium alloys are the ? + ? pre-strain and ?-recrystallisation processes which are carried out to homogenise both chemistry and morphology. The ? grain structure generated during the ?-recrystallisation process transforms to a lamellar ? + ? microstructure which is subsequently broken down during secondary processing. Large effective structural units of similarly aligned laths generated during the cooling from the ?-recrystallisation process potentially persist through this secondary processing to the final application, reducing the lower mechanical property bounds of the alloy. To investigate the effect of strain, strain rate, pre-strain temperature, ?-recrystallisation temperature and time at ?-recrystallisation temperature on final ? grain size several large scale Ti-6Al-4V and Timetal 575 double cone samples were forged, sectioned and ?-heat treated at the Advanced Forming Research Centre, Glasgow. Using industrially relevant parameters and intermediate stage billet material provided by TIMET enabled the generation of a comprehensive data set of final ? grain sizes as a function of the five input parameters. Micro and macrostructural investigation of the as received, as-forged and final ?-recrystallised state comprehensively characterised the microstructural evolution throughout the process. To determine the minimum effective strain required to initiate dynamic recrystallisation of the ? phase in ? + ? phase field deformation backscatter electron imaging, electron backscatter diffraction and ? reconstruction techniques were employed. Very low effective strains (0.1 6 ?) were required to initiate and complete the ? recrystallisation of early intermediate, ?-workout Ti-6Al-4V material with unsaturated grain growth continuing at extended times at temperature. Despite the coarse, heterogeneous starting material very low ? + ? effective strain and short times above the ?-transus temperature were enough to produce a homogeneous, equiaxed microstructure devoid of the gradient of effective strain produced by the double cone sample geometry. Due to using a more refined Ti-575 starting microstructure and because of slower phase transformation and grain growth kinetics this gradient of effective strain was more apparent in the final ?-recrystallised state of Ti-575 with reduced grain size coinciding with an increase in ? + ? pre-strain. Ultimately, the fine colony basket-weave microstructure generated during the water quench from the industrial ? recrystallisation process produced in Ti-575 an effective structural unit size an order of magnitude lower than in Ti-6Al-4V.

Degree

thesis:*
Name dc:type.qualificationname
engd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2016

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Allan, Michael MacDonald
Advisors dc:contributor.advisor
  • Thomas, Matthew
  • Brooks, J. J.
  • Blackwell, Paul
Author Identifier dc:creator.authoridentifier
  • 201175102

Rights

Identifiers

dc:identifier.*
Identifier
T14463

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-20
Source record
OAI-PMH GetRecord
related terms
citation

Allan, Michael MacDonald. ?-recrystallisation characteristics of ? + ? titanium alloys for aerospace applications. doctoral-pg thesis, University of Strathclyde, 2016. https://stax.strath.ac.uk/concern/theses/f7623c709