Back to search

University of Strathclyde

Integrating robotic welding constraints into the structural optimisation of ship structures for enhanced automated production

Abstract

dc:description.abstract

The maritime industry faces significant challenges in automating the assembly of complex ship structures. While automated joining is successfully implemented in open-block stages using inverted welding gantries, automation is severely obstructed once structures are assembled into enclosed, closed-block configurations. The ship's double bottom represents a critical application of these confined environments, requiring robotic systems to navigate internally within tight compartments.Conventional structural optimisation historically prioritised weight minimisation, introducing complex, dense stiffener layouts that render closed geometries "manufacture-impenetrable" and kinematically inaccessible to industrial robots. To bridge this gap, this thesis proposes a novel framework that embeds robotic welding constraints directly into the early-stage structural design phase as active, multiobjective parameters. Executed through a five-phase methodology, this research first maps industrial gaps via a systematic review, establishing the baseline for "Design for Automation." Second, production simulation of the double-bottom structural geometry demonstrates that robotic welding achieves an estimated 3.85-fold speed increase and a 1:2.75 energy-to-labour cost ratio over manual methods. Third, a structural optimisationengine coupling a Multi-Objective Genetic Algorithm with Response Surface Methodology is formulated to concurrently minimise mass and weld lengths. Fourth, a high-fidelity Virtual Prototyping Framework isolates kinematic limits within a compressed 1.2-meter clearance, proving the Elevated (On-Stiffener) configuration asthe only commercially viable architecture due to Axis 3 ceiling collision risks. Finally, the integrated framework was realised on a ship's double-bottom block considering robotic welding constraint, achieving an 18.15% reduction in structural mass while maintaining a constant stiffener count and expanding the vertical robotic working envelope to a collision-free 970 mm clearance. The scantlings strictly comply with IACS CSR and Lloyd's Register standards (174.05 MPa stress; 1.1306 buckling load multiplier) with an error margin below 0.5%. This research establishes a definitiveroadmap for Robot-Informed Design, concurrently optimising structural efficiency and automated manufacturability to advance global shipbuilding productivity.Keywords: Robotic Welding, Multi-Objective Structural Optimisation; Ship Production; Ship Structure; Confined Space; Cost Efficiency.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2026

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Wahidi, Sufian Imam
Advisors dc:contributor.advisor
  • Oterkus, Selda
  • Oterkus, Erkan
Author Identifier dc:creator.authoridentifier
  • 202265204

Rights

Identifiers

dc:identifier.*
Identifier
T18186

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Wahidi, Sufian Imam. Integrating robotic welding constraints into the structural optimisation of ship structures for enhanced automated production. doctoral-pg thesis, University of Strathclyde, 2026. https://stax.strath.ac.uk/concern/theses/gf06g3253