Back to search

University of Strathclyde

Synthesis of calcium silicate hydrate (C-S-H) and novel cementitious materials : characterisation, engineering applications and environmental aspects

Abstract

dc:description.abstract

This doctoral dissertation describes the synthesis and characterisation of calcium silicate hydrate (C-S-H) phase and other cementitious materials. C-S-H is the most important mineral phase in ordinary Portland cement (OPC), accounting for strength and hardening. Its characterisation has been the subject of research in the past 70 years and yet there are still gaps in knowledge and understanding. In this work the development of a novel method process for direct synthesis of solid calcium silicate hydrate (C-S-H) phases is proposed, by mixing calcium hydroxide and silica. This method allows crystal structural determination of the synthetic mineral, and permits characterisation at the atomic scale and also mechanical-hydraulic measurements on monoliths, rather than the more traditional slurry format. The method is easy, relatively fast and highly reproducible. In particular, structure evolution of synthetic C-S-H is studied under varying calcium to silica ratio, curing time and silica particle size, using either silica fume or nano-silica (particle size). While this method advantageously produces solid C-S-H, its production at bulk-scale is also evaluated by means of a life cycle assessment and compared to other OPC-free binder materials. Novel OPC-free cementitious binders are in fact developed and characterised in terms of mechanical and thermal performance. Proposed as an environmentally friendly alternative to Portland cement, these innovative cementitious materials have a lower carbon footprint and contribute to reduce Portland cement consumption and its CO2 emissions. Hydrothermal synthesis of C-S-H is carried out to investigate the response to hot and wet conditions, typical of cement encapsulation in deep geological storage of radioactive waste. As a result of these investigations, synthesis conditions have been proven to be the key in "tailoring" and designing the C-S-H structure at the nano-scale. C-S-H produced is used as a crack-sealing agent in aqueous injection. A lab-scale investigation shows that aqueous nano-silica injected through a hardened cement matrix reacts with calcium hydroxide naturally present in hydrated Portland cement producing additional C-S-H and reducing the overall porosity and permeability. This study explores the potential use of solid C-S-H to repair large scale structures which are wet or under water, such as legacy ponds in nuclear waste storage facilities.

Degree

thesis:*
Name dc:type.qualificationname
phd
Level dc:type.qualificationlevel
doctoral-pg
Grantor dc:publisher.institution
University of Strathclyde
Year dc:date.issued
2018

Author and committee

dc:creator, dc:contributor.*
Author dc:creator
  • Maddalena, Riccardo
Advisor dc:contributor.advisor
  • Hamilton, Andrea
Author Identifier dc:creator.authoridentifier
  • 201469248

Rights

Identifiers

dc:identifier.*
Identifier
T14864

Chain of custody

source
Harvested from
University of Strathclyde
Base URL
stax.strath.ac.uk/catalog/oai
Last updated
2026-11-19
Source record
OAI-PMH GetRecord
related terms
citation

Maddalena, Riccardo. Synthesis of calcium silicate hydrate (C-S-H) and novel cementitious materials : characterisation, engineering applications and environmental aspects. doctoral-pg thesis, University of Strathclyde, 2018. https://stax.strath.ac.uk/concern/theses/m326m1846